|
Sponsor
|
|
|
Looking For An Alternative To Inaccurate And Timely Manual Inspections?
The PAPPIS Plug and Play is an affordable system that is easy to operate. You won't have to pay for extra floor space because you can roll it to any location, plug it in, and it is ready for your product. It processes up to 200,000 tablets per hour with high accuracy. Find out more information and view videos of the PAPPIS in action.
|
|
|
Featured Articles
|
|
Implementing A Proactive Approach To Preventing Secondary Dust Explosions
By VAC-U-MAX
Under intense scrutiny since the U.S. Chemical Safety and Hazard Investigation Board (CSB), released its 2006 Combustible Dust Hazard Study, OSHA is taking action to amend its General Industry Housekeeping provision, 1910.22. The amendment to the housekeeping requirements comes as a result of employers' misinterpretation of housekeeping standards already included in the provision.
|
|
|
Case Study: Buffer And Media Preparation Systems
By Integrated Process Engineers & Constructors Inc. (IPEC)
A buffer preparation system prepares buffers to be used in various stages of recovery
operations. The buffer prep system contains equipment used for large-scale and small-scale
buffer preparation. Buffer preparation is done using 500 L, 1,500 L and 3,000 L fixed stainless
steel vessels.
|
|
|
Containment Valve Systems For Pressure And Vacuum Applications
By ChargePoint Technology
The active and passive halves of the ChargePoint valve come together to form a "metal-to-metal" disc
seal. There are no gaskets, o-rings, or inflatable seals necessary to create the seal between disc faces.
|
|
|
Issues Facing Device Manufacturers As F.D.A. Moves Closer To Mandating Electronic Reporting (eMDR)
By Sparta Systems
In the coming months, The FDA Center for Device and Radiological Health (CDRH) is rumored to be issuing a rule that will establish a timetable for requiring electronic submission of medical device reports (eMDRs). When the mandate for electronic submission becomes effective, MedWatch 3500A filers will no longer be permitted to submit paper reports, but will have to submit 3500As electronically. This includes device manufacturers, distributors, reprocessors, hospitals, and physicians.
|
|
|
Selecting A Chemical Fume Hood: It May Be Easier Than You Think!
By Trinda Wheeler, Labconco Product Specialist, LEED AP
Choosing the right fume hood can seem daunting. There are so many options to choose from, and so much information to gather in order to make an informed decision, but help is at hand!
|
|
|
|
Sponsor
|
|
Scope of this research:
- Explains how molecular diagnostics represents a business opportunity for the IVD industry
- Analysis of markets by key types of testing, products, and by country; analysis showing the top products and opportunities.
- Profiles key players in the field, including established companies and growing companies with innovative technology.
Find out more.
|
|
|
|
Spotlight On Tablets And Capsules
|
|
Product Brochure: Natoli NP-500 Rotary Tablet Press
The Natoli NP–500 Series is a double-sided, single-footprint rotary tablet press designed to compress tablets requiring extra fill and extended dwell time. It is a heavy-duty machine with unsurpassed technical support and replacement part availability. This series is available in semiautomatic and automatic models.
|
|
|
|
Presentation: PAPPIS Visual Inspection System
The PAPPIS is the new Viswill Plug And Play Portable Inspection System designed specifically by our customers. Our customers and potential customers asked us for a small, portable, easy-to-operate, high-speed, high-accuracy system with a lower price, and that is exactly what Viswill has delivered.
|
|
|
|
Product Overview: Vibratory Tablet Deduster Metal Check Combination Unit
The E4000 tablet deduster/conveyor with integrated Lock Met 30+ metal check unit removes dust from up to 6.3 million tablets per hour. It uses Kraemers patented counterweight system, which prevents the helix vibration from being transmitted to the housing and stand. The E4000 features the C820 automatic controller for dedusters, that determines and maintains optimum frequency using closed-loop processing, to ensure continuous tablet flow, even with varying product loads.
|
|
|
|
Product Sheet: Tablex 2 Pharmaceutical Metal Detection
The use of Safeline's sophisticated detection coil
technology combined with new enhanced filtering
techniques delivers unparalleled on-line sensitivity to
all metal types. Ferrous, non-ferrous, and normally
difficult to identify non-magnetic stainless steel
contaminants are easily detected.
|
|
|
|
Brochure: E-Z Tec® Pharmaceutical Metal Detectors
This gravity-fed metal detector is designed for the detection and removal of minute pieces of ferrous, nonferrous, and stainless steel contaminants.
|
|
|
|
Brochure: INSIGHT Pharmaceutical Metal Detector
Offering metal detection levels down to 0.1mm, the new LOCK INSIGHT range of pharmaceutical metal detectors can detect and reject metallic particles in pharmaceutical production lines at speeds of up to 30,000 tablets/minute. Where the INSIGHT really excels is in its ability to create stable and sensitive setups with difficult product applications.
|
|
|
|
|
Featured Downloads
|
Detection And Quantitative Analysis Of Lactose Using Ion Mobility Spectrometry
Detection of trace amounts of a substance is important for applications ranging from food to aerospace to pharmaceuticals and many more. It is critically important in pharmaceutical manufacturing where very small amounts of any contaminate can result in hundreds of thousands of dollars wasted, or in the worst case scenarios, the manufacturer to liability.
|
|
Brochure: Ropack Contract Manufacturing And Packaging Services
When it comes to manufacturing and specialized packaging, Ropack has developed a range of custom services to meet the particular needs of the pharmaceutical, biotechnological, nutraceutical, and cosmetic industries.
|
|
Datasheet: Tablet Tester Accessories Mechanical Tablets
Use this mechanical tablet to periodically check your hardness tester model 2E, 4M, 6D, or 8M for proper operation. Only use mechanical tablets marked for the tester model being checked.
|
|
White Paper: ChargePoint Containment Valve Systems For Pressure And Vacuum Applications
The active and passive halves of the ChargePoint valve come together to form a "metal-to-metal" disc
seal. There are no gaskets, o-rings, or inflatable seals necessary to create the seal between disc faces.
|
| Browse the download library |
|
|
|
|
Featured Webinar
|
September 15 | 11:00 AM ET
This webinar will highlight the dos and don'ts of preclinical immunogenicity screening and how doing it the right way can strengthen biologic development pipelines by improving the quality, safety, efficacy, and manufacturability of antibodies, therapeutic proteins, and vaccines.
Click here for more information and to register.
|
|
|
|
|
Featured Multimedia
|
|
| Video: Heat Transfer Fluids |
|
Watch this short video for an easy way to check and see if your heat transfer fluids will keep working.
|
|
|
|
|
Industry Event
|
| Media And Buffer Prep Powder Handling For The Biopharmaceutical Industry |
Presented By ILC Dover
September 1 | 11:00 AM
This webinar will familiarize you with the use of the DoverPac® flexible containment systems for use in Media and Buffer preparation operations. These three dimensional, disposables are the state of the art in powder transfer for cGMP applications.
|
|
|
|
|
Submission Information
|
|
Pharmaceutical Online invites members of the community to submit their technical articles,
application notes, white papers, tutorials, videos, press releases, and other relevant content for featuring on www.pharmaceuticalonline.com and in our e-mail newsletter.
For more information, please consult our editorial submission guidelines.
|
|
|
|
