Product/Service
Shear Cell Modules: FT4 Powder Rheometer
Source: Freeman Technology Ltd
The Automated Shear Cell modules for the FT4 Powder Rheometer allow assessment of powders in terms of shear strength. Using a shear cell on the high-specification FT4 platform enables the automatic generation of accurate and reproducible shear information.
Click Here To Download:
•Product Brochure: FT4 Powder Rheometer: Universal Powder Tester
•White Paper: Validation Of Shear Testing Using The FT4 Powder Rheometer And Limestone Powder CRM 116
•White Paper: Volumetric Dosing Efficiency In Relation To The Bulk, Flow, And Shear Properties Of Powders
•White Paper: Characterizing Powders For Optimized Pharmaceutical Processing
•White Paper: Intelligent Powder Processing
•Video: FT4 Powder Rheometer: V14_Dynamic Flow Mode
Each shear cell is delivered with a library of testing programs in which the following stages are fully automated:
•Product Brochure: FT4 Powder Rheometer: Universal Powder Tester
•White Paper: Validation Of Shear Testing Using The FT4 Powder Rheometer And Limestone Powder CRM 116
•White Paper: Volumetric Dosing Efficiency In Relation To The Bulk, Flow, And Shear Properties Of Powders
•White Paper: Characterizing Powders For Optimized Pharmaceutical Processing
•White Paper: Intelligent Powder Processing
•Video: FT4 Powder Rheometer: V14_Dynamic Flow Mode
•Product Brochure: FT4 Powder Rheometer: Universal Powder Tester
•White Paper: Validation Of Shear Testing Using The FT4 Powder Rheometer And Limestone Powder CRM 116
•White Paper: Volumetric Dosing Efficiency In Relation To The Bulk, Flow, And Shear Properties Of Powders
•White Paper: Characterizing Powders For Optimized Pharmaceutical Processing
•White Paper: Intelligent Powder Processing
•Video: FT4 Powder Rheometer: V14_Dynamic Flow Mode
The Automated Shear Cell modules for the FT4 Powder Rheometer allow assessment of powders in terms of shear strength. Using a shear cell on the high-specification FT4 platform enables the automatic generation of accurate and reproducible shear information. This is in addition to bulk powder properties data and the comprehensive powder flowability data provided by a standard FT4 measurement.
A range of shear cell options is available to suit different sample sizes and applications:
- 85ml powder volume using 48 mm diameter shear head
- 10ml powder volume using 24 mm diameter shear head
- 1ml powder volume using 24 mm diameter shear head
Each shear cell is delivered with a library of testing programs in which the following stages are fully automated:
- The standard conditioning cycle that prepares the sample for testing
- A 'pre-shear' stage during which the powder bed is sheared to maximize the major principal stress
- A single series of tests at a particular pre-consolidation stress, which may be sufficient for powder characterization. For example, a powder may be pre-consolidated to 10 kPa and then sheared at 9, 6 and 3 kPa, with pre-consolidation to 10 kPa between each test
- More comprehensive, multi-stage testing to produce a range of yield loci corresponding to different pre-consolidation stress levels. Usually a given sample will be suitable for repeated shear testing to obtain the required set of yield loci. In this case the entire evaluation is automated.
•Product Brochure: FT4 Powder Rheometer: Universal Powder Tester
•White Paper: Validation Of Shear Testing Using The FT4 Powder Rheometer And Limestone Powder CRM 116
•White Paper: Volumetric Dosing Efficiency In Relation To The Bulk, Flow, And Shear Properties Of Powders
•White Paper: Characterizing Powders For Optimized Pharmaceutical Processing
•White Paper: Intelligent Powder Processing
•Video: FT4 Powder Rheometer: V14_Dynamic Flow Mode
Need More Information? Just Ask.
Click the button below to directly contact the supplier. Use it to:
- Ask a question.
- Request more detailed information or literature.
- Discuss your current project/application.
- Request a quote.
- Locate a distributor in your area.
- Schedule a demo.
