Product/Service
arium® EDI 61215 Laboratory Water Purification System
Source: Sartorius Stedim Biotech
The arium EDI 61215 laboratory water purification system is designed to produce ASTM type 2 water for general laboratory applications. The arium EDI 61215 provides consistent water quality by delivering purified water at a rate of at least 15 l/hr while rejecting 99% of inorganic contaminants as well as bacteria and viruses.
Click Here To Download:
•Product Sheet: arium® EDI 61215 Laboratory Water Purification System
•Product Sheet: arium® EDI 61215 Laboratory Water Purification System
•Product Sheet: arium® EDI 61215 Laboratory Water Purification System
The arium EDI 61215 laboratory water purification system is designed to produce ASTM type 2 water for general laboratory applications. The arium EDI 61215 provides consistent water quality by delivering purified water at a rate of at least 15 l/hr while rejecting 99% of inorganic contaminants as well as bacteria and viruses. The arium EDI 61215 purification procedure that combines reverse osmosis, softening and electronic | chemical desalting enables a nearly maintenance-free and inexpensive supply of pure water. By use of an optional closed pressurized tank (30, 70, 100 liter) the product water will be distributed with up to 3 bar to the point of use.
Features:
- Four line alphanumerical display
- Display of conductivity, rejection rate, tank level, temperature etc.
- Production capacity up to 360 l/day
- Automatic RO membrane back-flush with RO permeate
- Several alarm and service functions
- Product water storage in open gravity or closed pressurized tank
- Serial interface RS-232 port
- Flexible display unit can be mounted at the top or bottom of the unit or in a remote location up to 2.8M from the system
- Feed water for ultrapure type I water systems
- Rinsing glassware and laboratory vessels
- Media and buffer preparation
- Feed water for humidifiers, autoclaves and dishwashers
- Typical resistivity*: 10-15 M? x cm
- Typical conductivity*: 0.1-0.07 µS/cm
- Typical TOC level*: < 30ppb
- Product flow rate: (± 20% at 25°C) 16[l/h]*
- Maximum recovery rate* Approx. 55%
- Monovalent ions: Up to 98%
- Polyvalent ions: Up to 99%
- Particles: > 99%
- Microorganisms: > 99%
- Dissolved organics: (>300 MW): > 99%
Inlet feed water requirements:
- Potable tap water feed only (feed water to meet drinking water standards of the U.S., European Union or Japan)
- Minimum inlet pressure: 1.2 bar | 17.4 psi
- Maximum inlet pressure: 6.8 bar |100 psi
- Temperature: 5°C–30°C (41°F–86°F)
- Hardness (max CaCO3): 360 ppm or softened water
- Maximum CO2: <30 ppm
- Silt density index: < 3
- Free chlorine: 0.1 ppm
- Turbidity: < 1 NTU
- Iron (total as Fe): < 0.1 ppm
- Operation: 5°C–30°C (41°F–86°F) 80% relative humidity
- Storage: 5°C-45°C (41°F–113°F) 80% relative humidity
•Product Sheet: arium® EDI 61215 Laboratory Water Purification System
Need More Information? Just Ask.
Click the button below to directly contact the supplier. Use it to:
- Ask a question.
- Request more detailed information or literature.
- Discuss your current project/application.
- Request a quote.
- Locate a distributor in your area.
- Schedule a demo.
