How To Save Money With Leak Testing

In the blister packaging line for pharmaceutical products, it is typical to use a blue dye test for leak inspection. With the blue dye test you have to throw away every tested pack whether or not it fails. Just imagine - if you use the Blue Dye test on about 20 packs every 15 minutes, you will test approximately 150,000 blisters per year. If each pack costs more than $1 each to produce, this means your company must be throwing away an incredible $150,000 every year. And that is just on one blister line alone.

Imagine if you had a clean and dry test which was able to protect the blisterpacks from any damage during testing. You could save all of the blisterpacks which don't have leaks and put them back into the blisterpacking line rather than throwing them away.

Sepha has revolutionized blister packaging leak detection process with their deblistering machine the BlisterScan. 

See the other other savings benefits the Blisterscan leak detection tests, and then multiply these savings by the number of blister lines.