Precise Controlled Atmosphere Glove Boxes provide a leak-tight environment for work with contamination-sensitive materials. Procedures where low levels of oxygen or moisture are important, such as work with organometallics; alternative energy cells; or hydrophilic chemicals, are typical applications for these economical glove boxes.
Features
One-piece molded, medium-density polyethylene shell.
Dry powder epoxy-coated steel superstructure
1/4" thick laminated safety glass viewing window, 26.4" wide x 12.5" high, removable for loading equipment, with powder-coated steel frame and neoprene gasket
Space-saving inner and outer transfer chamber doors that pivot upward, are counterbalanced and equipped with quick-latches
Black, chemical-resistant work surface sealed to the glove box floor
Pressure relief valve that activates at pressure/vacuum above 6 inches or below -6 inches of water gauge.
Pressure relief valve vent, 4" nominal diameter
Interior ceiling-mounted electrical duplex receptacle with 5 amp maximum circuit load
Neoprene gloves, size 9 3/4, are included.
Fluorescent lamp, 22 watts, with easy replacement from the top
Switches for light and innermost interior electrical receptacle
Approximately 13 cubic feet of interior space in main chamber
11.0" nominal ID x 12.0" long transfer chamber
Factory leak tested with a mass spectrometer while glove box is pressurized with helium at 5 inches of water gauge.
No detectable leaks greater than 1 x 10(-4) ml/sec
Meet Class 1 atmosphere containment conditions for oxygen leak rates per ISO 10648-2 test method
Six manual valves for purging and filling of both main chamber and transfer chamber and for drying train connections
Main chamber pressure gauge with readings from -5 to +5 inches of water gauge
Transfer chamber pressure gauge with readings from 0 to -29 inches of mercury
Transfer chamber high vacuum sleeve and interior interlocking shelf of dry powder epoxy-coated steel
ETL listed (115 volt models)
CE Conformity (230 volt models)
