11.07.20 -- Solid Dose Manufacturing Product Showcase

Pharmaceutical sterile manufacturing operations are rigorously scrutinized for integrity and consistency to maintain patient safety. Accordingly, pharmaceutical process equipment supporting or controlling sterile operations is designed to meet strict regulatory guidelines and design requirements.

Designed to meet the exacting standards and regulations of the pharmaceutical industry, Mettler Toledo Safeline pharmaceutical metal detectors provide the ultimate solution in fully integrated product inspection and rejection systems for tablets, capsules, powders, and granules. Our metal detection systems are designed to detect all metal contaminant types, including ferrous, nonferrous, and even the most difficult to detect nonmagnetic stainless steels.

Nondestructive package testing of multicavity blisters — completely tool-less for different blister formats.

With ample available capacity, Ropack Pharma Solutions provides the efficiency of five bottling lines with quick changeovers, on-line validated fill accuracy, and the flexibility to accommodate small lots to commercial runs for the bottling of tablets, capsules, and powders.

Used Glatt fluid bed dryer, model GPCG 2, stainless-steel construction, with extended drying chamber, with unused 7" Wurster insert and used 6-liter drying chamber insert, 15 mbar rated, xp design, CE rated, serial# A13209, built in 2014.

The NP-RD10A fits on benchtop areas and is constructed with an electroless nickel frame. Using this tablet press in lab research helps to significantly improve tablet uniformity, reduce trial and error, decrease formulation waste, and save valuable time and effort.

The Ross Double Cone Blender is most often used for the intimate dry blending of free-flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates.

The HC-A-MI is the perfect automated system for continuous and accurate weighing of ultra-lightweight parts (for example, stick packs) in the milligram range. Product infeed is product-specific and individually managed.

The Coperion K-Tron PH line of pharmaceutical design loss-in-weight vibratory tray feeders combines high accuracy with a configuration that is ideal for materials that may not be suitable in twin screw feeders, such as difficult flowing APIs. The gentle vibratory feeding principle allows for low-rate feeding without build up, which can occur on screws and screw tubes.

The patented PTS Batchmixer allows the mixing of powders with different characteristics in a contained environment while reducing overall process times compared to traditional systems. With industrial applications from 2 to 6,000 liters, the system also enables the operator to vary product volumes from 10 to 100 percent.

Virtis has managed to pack valuable features in this small freeze dryer system for your laboratory needs. The smallest shelf freeze dryer offered, this equipment can be configured with a manual or automated control system and as a bulk or stoppering freeze dryer.

Residual product moisture content is a critical parameter when considering the stability and shelf life of lyophilized pharmaceutical product, sterile powders, or solid dosage product. Lighthouse offers complete solutions for moisture determination of dry product.

The JetVent system allows for easy and confident handling of expensive and dangerous powders. The pressure inside the enclosure, measured with high precision, is used to control fan speed and gas inlet.

With the AMI and its optical emission spectroscopy, Pfeiffer Vacuum has introduced a method with lower detection limits compared to any other method that uses gas trapped in the cavity.