Pharmaceutical Multi-Head Leak Testing

The Pharmaceutical Leak Testing Machine is used for off-line Non-Destructive Container Closure Integrity Testing. It performs the Leak Testing process on five containers at a time by means of a Testing Section under Vacuum or Pressure. The Leak Testing Machine is made up of one Front Section with five bottom parts where Containers are manually loaded and unloaded, and one Testing Section where the Mobile Upper Part with vertical movement is closed over the five bottom parts. Containers are transported throughout the Sections by means of a rotating table with 180° degrees indexing motion. Whether the result is Conforming or Non-Conforming, the HMI clearly displays the status and the bottom part position on the screen. The Measurement System provides both a “gross” and a “fine” leak test detection range.

Technical Specifications

• Tested Container - Flowrapped Device, Bottles, Vials, MDI , MDPI , IV Bags , Pouches, Stick Packs.
• Container Filling - Filled
• Container Content - Liquid, Powder, Semi-solid
• Machine Type - Laboratory Leak Tester
• Testing Methods - Vacuum Decay
• Max speed - 20 CPM
• Min Container Dimension - 5 x 86 x 5 mm
• Max Container Dimension - 30 x 86 x 170 mm
• Testing Heads Number - from 5.00 to 5.00

Technical data may be changed without notice