Product/Service

Quadro Ytron® ZC Single-Pass, High Shear Powder Into Liquid Disperser

Source: Quadro Engineering Corp.
Three sanitary design models are available ranging from pilot scale up to 120gpm to provide single Pass, air free, repeatable dispersion of the most difficult powders into liquids, i.e. Carbopol®, Pemulen®, Xanthan gum, Cellulose gums, Guar gum, Synthalen®, Polygel®, Pigments, Pectin, Polymers, Gums and other thickening agents...
Three sanitary design models are available ranging from pilot scale up to 120gpm to provide single Pass, air free, repeatable dispersion of the most difficult powders into liquids, i.e. Carbopol®, Pemulen®, Xanthan gum, Cellulose gums, Guar gum, Synthalen®, Polygel®, Pigments, Pectin, Polymers, Gums and other thickening agents.

The Quadro Ytron® ZC Powder Disperser complies with 3A Sanitary Standards and is USDA accepted as a full CIP Sanitary Design and Fabrication of Dairy Processing Equipment. The Quadro Ytron® ZC is designed specifically to disperse extremely difficult to wet powders into a liquid stream, in a single pass, without aeration, or the need for additional solvents or heat. This efficient mixing results in no waste, no lumps or ‘fish-eyes'.

Advantages of the Quadro Ytron® ZC Technology

  • The ability to hydrate completely all the difficult to wet gums and polymers in a single pass.
  • Capacities from 3 to 120 usgpm (12 to 455 L/min.).
  • Concentrations up to 25% by weight.
  • Up to 40% powder savings / no powder wastage or overshear.
  • Reduced batch time by up to 80%.
  • No unnecessary air entrainment.
  • Easy clean-up and portability.
  • Optional vacuum delivery system for completely dust-free operation.

Downloads: