Granulators & Fluid Bed Dryers

1. Used 75 Liter Vector Pharmaceutical High Shear Granulator: GMX-75 10/3/2023

   Used 75 Liter Vector high shear mixer, model GMX-75, stainless steel construction, 75 liter jacketed bowl, with 7.5 hp mixer motor, 5/2.5 hp high speed chopper motor, .75 hp bowl lift/lower motor, side mounted pneumatically operated plug valve, and bottom mounted pneumatically operated sample valve, with integrated operator panel and control panel, mounted on common skid, serial# GMX-100-45751, built 2004.

2. Used Globe Pharma High Shear Granulator: Model GPHSG-5 10/3/2023

   Used Globe Pharma high shear granulator, model GPHSG-5, with 1, 3 and 5 liter stainless steel bows, 1 hp, 110 volt, main blade motor, with removable top mounted chopper, serial# 052237829, built in 2022

3. Used GEA Niro Pharmaceutical Spray Drying System 11/4/2021

   Used GEA Niro sanitary spray drying system consisting of: Model PSD4 GEA Niro spray dryer, approximately 8' inner diameter x 8'6" straight side x 8'9" deep cone bottom spray dryer chamber, 316 stainless steel product contact surfaces, mirror internal finish, with fluid nozzle and centrifugal rotary atomizers, approximately 17" diameter, sanitary stainless steel cyclone fines collector, approximately 6' diameter dust collector, sanitary stainless steel construction, pulse jet, cone bottom, set up for electric or steam heating with Watlow, 145 kw electric heater with external Hepa filter, air handler with steam coil and Watlow 37.25 kw electric heater, internal Hepa filter, designed for nitrogen purge, 7.5 hp process air supply blower, 7.5 hp process air return blower, set up for solvent recovery with condenser(less receiver pot), solution feed pump with Micro Motion flow meter, inter connecting pipe work from dryer, to dust collector and cyclone, GEA Niro control panel and HMI panel, 460 volt, 3 phase, GEA Niro fabrication# 099-0013-00, built 1999.

4. Used Glatt GPCG Pro 30 Fluid Bed Dryer Granulator 5/11/2020

   Used Glatt GPCG PRO 30 Fluid Bed Dryer Granulator with 12 bar shock resistance, top spray granulation bowl (145L), Wurster 18’’conical (101L) bottom spray insert, steam heated, blower (Flow rate 2000m3/h, motor capacity 22kW), air handling with HEPA, mass flow meter, operator interface controller with DAQ acquisition system.

5. Used MP1 Fluid Dryer Granulator 10/16/2019

   Used Niro fluid bed dryer granulator, model MP1, stainless steel construction, 10 bar internal shock pressure with misc chambers, air handling, blower and controls, serial# 05305-1320, built 2005.

6. Used Vector Granulator: CF360E 6/18/2019

   One (1) used Vectro granulator, mdoel CF360EX, stainless steel construction, 3-5 kg capacity, xp design with controls, 220 volt, serial# CF-110, new 1982.

7. Used 0020 Fluid Air Fluid Bed Dryer, 316 S/S 5/26/2017

   One (1) used Fluid Air fluid bed dryer granulator, model 0020, 316 stainless steel product contact parts, currently set up with dryer chamber, chamber designed to handle Wurster coating with change parts, electrically heated with 12 kw heater, blower, with on board plc controls with HMI interface, 575 volt, serial# 10169, built 1999.

8. Used Glatt GPCG 3 Fluid Bed Dryer Granulator 5/26/2017

   Used Glatt GPCG 3 Fluid Bed Dryer Granulator, wurster, top spray granulation and rotor granulation inserts with bowls, 2.2 kw blower, 220 volt with controls.

9. Used Glatt GPCG 15 SC Fluid Bed Dryer Granulator 5/26/2017

   Minimally used Glatt GPCG 15 SC fluid bed dryer granulator. Design is 3 Bar Pressure Shock rated for aqueous processing only. SC, or Super-Clean, Design. Featured with stainless cartridge air pulse exhaust filters, includes legacy PLC based control system with HMI, CIP Skid with pumps, automatic valves, tanks, detergent dosing, loose CIP piping and cleaning nozzles, inlet AHU with electric heat, duct flaps, process tower with top spray granulator/dryer bowl.