Master the art of tablet manufacturing with our comprehensive hands-on seminar, designed to equip you with in-depth knowledge and skills required for pharmaceutical and supplement manufacturing. This two and a half-day course covers essential topics such as tablet press setup, powder preparation, formulation, excipients, API, direct compression, wet granulation, dry granulation, tablet press operation, compaction, lubricants, and quality control.

Introducing Solid Dose Manufacturing Process Training, a comprehensive three-day course designed to equip you with the essentials of creating high-quality tablet and capsule oral solid dosage forms. Limited to 24 participants, this hands-on course ensures a more intimate learning experience tailored to each attendee's needs. Discover the techniques that will assist you in enhancing your development and scale-up operations in the pharmaceutical industry.

Immerse yourself in this comprehensive two-and-a-half-day training event that focuses on two-piece hard shell capsule filling for pharmaceutical and supplement manufacturing. Learn about the encapsulation process, common equipment, terminology, and gain practical knowledge with hands-on breakout sessions.

Film Coating Technologies is a two-and-a-half-day training event focused on batch, continuous and Wurster technologies used to coat tablets, hard shell, and softgel capsules.

We will walk through the entire process of preparing the solutions, cleaning and setting up the equipment, calibration and run several batches of different tablets and capsules.

We will provide an explanation of each step in the process, common terminology, and provide practical knowledge of each topic. Hands on breakout sessions will be part of this course!

Granulation Technologies is a two-and-a-half-day training event focused on various granulation methods used in the pharmaceutical industry to create uniform, high-quality granules for tablet and capsule production.

We will cover the entire process, from raw material preparation to the final granulation step, including cleaning, setting up equipment, and running multiple batches using different techniques. Hands-on breakout sessions will be a crucial part of this course, providing participants with practical experience.

Used Mettler Toledo pass thru metal detector, model V4-RAD, approximately 650mm high x 150mm wide opening, CE rated, 240 volt, on stand.

SKU: 4427-1

Item Name: BAUSCH Advanced Technology Group Vial Filling, Labeling and Inspection Line, New 2021

Manufacturer: BAUSCH Advanced Technology Group

Location: United Kingdom

Used NJM dual-side labeler, model 334-LRWBP-211, Domino model DPX-1000 Laser Marker Printer System, s/n# 010411, with (Qty 2) Domino (BCP7) D620i Controllers, Domino model D620i Laser Marker Head, (Qty 2) Domino model AX150i Continuous Inkjet Printing Machines, each with Touch Screen Display, with Optel OP300 vision system, NJM serial# M97D0072.

Used Uhlmann blister packaging machine, model UPS4, unit includes unroll stand, chiller for cold forming, Aylward feeder, vision system, Gottscho, model 812-10 printer, 480 volt, Uhlmann serial# 401, built 1994.

Used Avery Syringe Labeler, model ALS-330R label head, with integrated 11" wide x 10' long roller conveyor, stainless steel housing with Allen Bradley plc controls, serial# 08870-01-0188, built 1995.

Used Nikka Densok pinhole inspector with feed tray, timing feed screw, currently set up for 2 ml vials on stand.

SKU: 4427-1

Manufacturer: Bausch+Stroebel

Location: United Kingdom

This 2021 Bausch vial filling line includes:

• Bausch type 721 de-bagging machine for vial tubs sized 221 x 379 x 49.5 mm, with oRABS
• Bausch type 411 enclosed sterile transfer chamber to decontaminate outer surfaces using 4 UV light lamps
• Bausch type 721 de-lidding and de-nesting of the vial tubs under isolator
• Bausch type 534 filling and closing machine for stoppers, operates under class A conditions into an isolator for toxic products, rotary infeed table, pre- and post-weighing for the In-Process Control (IPC) of a 100% weight verification of each vial, pre-gassing with nitrogen, dosing using 4 peristaltic pumps with a filling accuracy of up to ± 1%
• Bausch type 551 closing machine for aluminum crimp caps and flip-off with rotary infeed table, under isolator
• Bausch type 309 cleaning machine for external washing, rinsing and drying of the vials with vial discharge into trays, under isolator.
• Total floor space approx. 11,917 x 2,639 mm (LxW), max. height approx. 3,910 mm

Rebuilt ALPS (Automated Liquid Packaging Solutions), blow fill seal machine, model 301 BFS. Currently comes with 10 mL tooling, with vial size of approximately 63.3mm high x 18.6mm wide x 17.8mm deep cavities. Machine rated for 1 mL (4,500 units per hour) - 1,000 mL (400 units per hour) fill capacity depending on container size and product specifics. Includes integrated extruder with pellet hopper, bottle forming, filling, parison head and knife, bottle discharge and sterilization piping in one machine base, PLC controls with HMI touchscreen, machine# 4030, built 2012, refurbished by ALPS and unused.

Used Uhlmann horizontal cartoner, model C 2205, speeds up to 250/ minute, 150 mm x 100 mm x 90mm max cartoner size, dual blister feeder stations, with (1) powered and (1) drop feeder, Laetus scanner, 3/60/480, serial# 104, built 1994.

Used IMA cartoner, model IC150C, speeds up to 120 cartoners/minute, designed for pre glued cartons, 28 mm wide x 12 mm high x 55 mm long minimum carton size, 92 mm wide x 60 mm high x 190 mm long maximum carton size, with blister feeder, with leaflet inserter, Allen Bradley Micrologix 1500 plc with Panelview 550 HMI, Machine# B-92-024, built 2005.

Used IWKA fully automatic continuous motion horizontal cartoner, model CPS-R Cartopack, capable of speeds up to 300 cpm, adjustable three chain machine on 6" centers for a carton size range: (length) 25 - 125MM longx 16 - 80MM wide x 55 - 180MM deep, Nordson 3100 Hot melt glue system, 3' long carton magazine with Siko guage adjustment, three head rotary carton feeder, 8' long adjustable bucket infeed system, presently set up to accomodate Guk sheet fed leaflet feeder for "U" type leaflet insertion, equipped with dual blister feed system and was last running blisters in an OTC pharmaceutical operation, 460 volt, serial# 279, built 1998.

Used BellatRx electronic lane counter, model RX-Fill PLUS, speeds up to 25 bottles/minute at 100 count, 2-40mm tablet size, 1" - 4" by 12" high bottle size, 0.5" or larger neck diameter, Allen Bradley PLC controls with PanelView 600 HMI, 120 volt, order# 7155, serial# 035, built 2019.

Used Brevetti vial inspection unit, model A1, speeds up to 360 pcs/hour, currently set up for 53.5 mm diameter 100 mL vails, 8mm - 95 mm diameter x up to 240 mm high vial size range, with integrated robotic arm, (4) inspection units, with vial feed infeed and acceptable exit tables, dual reject stations, with HMI panel, serial# BM242, built 2016.

Unused SP PennTech inline mono-block vial filling line, consisting of: Model RW-800 rotary vial washer, serial# RW81202, model PST-45/380 depyrogenation tunnel, serial# PST453801402, Model FSC6/AC inline vial filler, stopper, capper unit, serial# FSC61401, with 6 head inline filling station, stopper inserter with bowl feeder, capper with bowl feeder, mounted inside RABS unit, change parts for 13 mm and 20 mm caps, 2 mL, 5 mL, 10 mL, 30 mL, 50 ml and 100 mL vials, tray loader, system built 2015, installed 2016 and unused.

Used IMA Flexfill Series monoblock filler/plugger/capper, model F940 filler, serial# RE1003, stainless steel product contact surfaces, capable holding up to 8 fill heads (currently set up for 6 fill heads), 20 - 90 mm diameter x 40 - 180 mm height vial size range, includes model F572 plug/pump inserter, serial# 572031, vibrating hoppers and bowl feeders, mounted under Laminar flow fume hood, built 2003.

Used Thermo Scientific Checkweigher, model Versa RX, 304 stainless steel construction, with pneumatic reject, touchscreen HMI, approx. 2,200 hours of use, with 6" wide infeed/outfeed conveyor, 115 volt, serial# A626, built 2014.

Unused Seidenader inspection system, type V90-AVSB/60-LR semi automatic inspection units, L-R orientation, currently set up for syringe inspection, with Sortec feeding system, 460 volt, Seidenader serial#, 117066

Used Klockner medipak blister packaging unit, Model EAS.

Used Filamatic Cubitainer bag in a box liquid filling system, rated up to 10 containers/minute, stainless steel product contact surfaces, with twin head filler with MicroMotion flow meters, neck positioning clamps, chain conveyor, twin head single chuck capper station with bowl cap feeder, Farason Cubitainer handling feed system, with Hytrol feed and discharge conveyors, previously filling 20 liter cubitainers, Fillamatic serial# 021707, built 2007.

Used Adtech syringe filler, SO# 725, with visual inspection system, capper feeder, Allen-Bradley PLC and interface, built 1989.

One (1) used Uhlmann blister packaging machine, model UPS 300, with HAPA ProntoPhot printer, type 203, serial# 20832, Uhlmann serial# 491, built 1988.

Used Klockner blister packaging line with model CP1200 blister filler sealer, model P3000 cartoner, and Scandia bundler, CP1200 serial# 017, P3000 serial# 036, built 2000.

Used Korsch PH103-DMS tablet press, 3 station, 40 kN compression, 19 mm max tablet diameter, 15 mm max depth of fill, rated up to 270 tablets/minute, with parts, 1.8 kW motor, 220 volt, serial# 1.0025.93, built 1993.

Used Elizabeth Hata R&D tablet press, model EP200, B/D tooled with 10 station turret, 5 stations each B and D, 16 mm B, 22 mm D max tablet diameter, 17 mm B, 18 mm D max depth of fill, rated up to 6000 tablets/hour, with feed hoppers and feed frames, Machine #81, built 2011.

Used Sejong rotary tablet press, model GRC-15C, 15 station, D tooled, 6 kn main compression, 2 kn pre compression, 25 mm max tablet diameter, 22 mm max depth of fill, with feed hoppers, rated up to 67500 tablets/hour, with integrated controls and touchscreen interface, serial# ST17866, built 2017.

Manesty Elite 800 Rotary Tablet Press, 61 station. SN #E800911. 65kN Compression Pressure with 10kN Pre Compression, Keyed Upper Punch Guides, Double Sided with Force Feeders, 16MM max Tablet Diameter, 17MM max Depth of Fill, Rated up to 587,000 tablets/hour Production Speeds, with Control Panel, Tooling and Accessories.

Used Elizabeth Hata HT-X65LD-U Tablet Press, 65 Station, BB-tooling, 8 ton pre and main compression, Keyed Upper Punch Guide, Dual Sided, Force Feeders, 13MM max tablet diameter, 18MM max depth of fill, 624,000 max TPH output, Feed hopppers, Control Panel, S/N: 2038.

Used Sejong rotary tablet press, model GRC-15C, 15 station, D tooled, 6 kn main compression, 2 kn pre compression, 25 mm max tablet diameter, 22 mm max depth of fill, with feed hoppers, rated up to 67500 tablets/hour, with integrated controls and touchscreen interface, serial# ST17866, built 2017.

Find all the equipment used to make solid dose tablets and other compressed materials right here. Federal Equipment Company offers used tablet presses and equipment to fully complete the tablet manufacturing process – used rotary and single station tablet presses, used tablet dedusters, used friability testers, used hardness testers, used metal detectors, used tablet printers, and an assortment of used tablet press turrets and parts.

Used Kilian rotary tablet press, model T100, 16 station, B/D IPT turret, with (8) B tooled, 16 mm diameter, 16 mm depth of fill and (8) D tooled, 25 mm diameter, 16 mm depth of fill stations in single turret, with additional 9 station IPT B toolded turrent, 42 Kn pre-compression, 65 Kn main compression, keyed upper punch guides, singled sided with force feeder, commission# 706849, built 2002.

Used Elizabeth Hata HT-X32-MS-U Tablet Press, 32 Station D Tooled, Keyed Upper Punch Guides, Single Sided, Force Feeder with Hopper, Controls, Serial# 250, Controls Upgraded 2018. S/N: 250.

Used Manesty Nova IPR Tablet Press, Model Nova, 51 Station, Keyed Upper Punch Guide, Single Sided with Force Feeder and Feed Hopper, External Panel, Manesty Serial# 15629-86.

Used Fette 3090i WiP rotary tablet press with containment, 75 station segmented turret, 100 Kn pre-compression, 100 Kn main compression pressure, 11, 18, 25 mm max tablet diameter depending on segment spacing, 22 mm max depth of fill, Pharma Technology serial#'s 0504751, 0504752, Lock serial# 25359-1, 25358-1, Fette serial# 280053, system built in 2005.

Used Korsch XL 400 2-Layer rotary tablet press. 35 station with B turret, 29 station with D turret. Serial# K1500036, built 2001.

Used BWI Manesty Unipress Diamond rotary table press, 27 station, keyed upper punch guides, 6.5 ton main compression, 1 ton pre compression, B tooled, 16 mm max tablet diameter, 18 mm max depth of fill, single side with force feeder with feed hopper, rated up to 196,200 tablets/hour, serial# UN248JA.

Hata Tablet Press, Model HT-AP55-DU/I.E. Double sided, serial number Nov. 90 - Oct. 1991

Used Key International single station bench top tablet press, model: SC-2. 1.5 ton compression pressure, approximately .5" max tablet diameter, .5625" max depth of fill, manual operation, serial# JI4786.

Used Korsch rotary tablet press, model PH250/25, 25 station, 20 Kn pre compression, 80 Kn main compression, 16 mm max tablet diameter, 18 mm max depth of fill, single side with force feeder, rated up to 180000 tablets/hour, serial# 1.0031.94, built 1994.

One (1) used Elizabeth Hata Elizatest Auto Sampler, model 3+, with (8) sample stations, with Mettler-Toledo scale, disposal bin, serial # ET3089707007

Unused Stokes 560 tablet press tooling, tooling size: 3650 x 7850 inch Caplet, 44 Lower Punch/44 Upper Punch/44 Die, manufactured by Natoli.

Used Korsch rotary tablet press, model PH106-DMS, 6 station, 40 KN compression pressure, keyed upper punch guides, 15 mm max tablet diameter, 15 mm max depth of fill, force feeder with feed hopper, rated up to 32,400 tablets/hour, with control panel, machine# 1.0062.95.

Used Manesty Drycota rotary tablet press, 16 stations, keyed upper punch guides, 13/16" maximum coated tablet diameter, 9/16" maximum diameter core, 3/16" maximum depth of fill on core with 7/16" maximum depth of fill on coated tablet, rated up to 664 tablets per minute, serial# 387556, 38656.

Federal Equipment Company offers a used Korsch XL 400 2-Layer rotary tablet press. 35 station with B turret, 29 station with D turret. Serial# K1500036, built 2001. Product specifications include: Compression Force: 10; Depth Of Fill: 18 mm-B / 22 mm-D; Estimated Shipping Dimensions: 64" x 38" x 88" main press.

100 Kn main compression with 100 Kn precompression, "B" tooled, dual-sided, 16 mm max tablet diameter, 18 mm max depth of fill with single layer, bi-layer capable with 16 mm max depth of fill, 10 mm max second layer depth of fill, speeds up to 766,800 tablets/hour single layer, 383,400 tablets/hour bi-layer. Includes spare turret and control panel. Serial # K1580006, built in 2003.

Used Korsch XL 800 rotary tablet press, 87 station. 100 Kn main compression with 100 kN pre-compression, "BB" tooled, dual sided, 13 mm max tablet diameter, 18 mm max depth of fill with single layer, bi-layer capable with 16 mm max depth of fill, 10 mm max second layer depth of fill, speeds up to 939,600 tablets/hour single layer, 469,800 tablets/hour bi-layer, with electrical panel, serial# K1580003, built 2002.

Used 75 Liter Vector high shear mixer, model GMX-75, stainless steel construction, 75 liter jacketed bowl, with 7.5 hp mixer motor, 5/2.5 hp high speed chopper motor, .75 hp bowl lift/lower motor, side mounted pneumatically operated plug valve, and bottom mounted pneumatically operated sample valve, with integrated operator panel and control panel, mounted on common skid, serial# GMX-100-45751, built 2004.

Used Globe Pharma high shear granulator, model GPHSG-5, with 1, 3 and 5 liter stainless steel bows, 1 hp, 110 volt, main blade motor, with removable top mounted chopper, serial# 052237829, built in 2022

Used GEA Niro sanitary spray drying system consisting of: Model PSD4 GEA Niro spray dryer, approximately 8' inner diameter x 8'6" straight side x 8'9" deep cone bottom spray dryer chamber, 316 stainless steel product contact surfaces, mirror internal finish, with fluid nozzle and centrifugal rotary atomizers, approximately 17" diameter, sanitary stainless steel cyclone fines collector, approximately 6' diameter dust collector, sanitary stainless steel construction, pulse jet, cone bottom, set up for electric or steam heating with Watlow, 145 kw electric heater with external Hepa filter, air handler with steam coil and Watlow 37.25 kw electric heater, internal Hepa filter, designed for nitrogen purge, 7.5 hp process air supply blower, 7.5 hp process air return blower, set up for solvent recovery with condenser(less receiver pot), solution feed pump with Micro Motion flow meter, inter connecting pipe work from dryer, to dust collector and cyclone, GEA Niro control panel and HMI panel, 460 volt, 3 phase, GEA Niro fabrication# 099-0013-00, built 1999.

Used Glatt GPCG PRO 30 Fluid Bed Dryer Granulator with 12 bar shock resistance, top spray granulation bowl (145L), Wurster 18’’conical (101L) bottom spray insert, steam heated, blower (Flow rate 2000m3/h, motor capacity 22kW), air handling with HEPA, mass flow meter, operator interface controller with DAQ acquisition system.

Used Niro fluid bed dryer granulator, model MP1, stainless steel construction, 10 bar internal shock pressure with misc chambers, air handling, blower and controls, serial# 05305-1320, built 2005.

One (1) used Vectro granulator, mdoel CF360EX, stainless steel construction, 3-5 kg capacity, xp design with controls, 220 volt, serial# CF-110, new 1982.

One (1) used Fluid Air fluid bed dryer granulator, model 0020, 316 stainless steel product contact parts, currently set up with dryer chamber, chamber designed to handle Wurster coating with change parts, electrically heated with 12 kw heater, blower, with on board plc controls with HMI interface, 575 volt, serial# 10169, built 1999.

Used Glatt GPCG 3 Fluid Bed Dryer Granulator, wurster, top spray granulation and rotor granulation inserts with bowls, 2.2 kw blower, 220 volt with controls.

Minimally used Glatt GPCG 15 SC fluid bed dryer granulator. Design is 3 Bar Pressure Shock rated for aqueous processing only. SC, or Super-Clean, Design. Featured with stainless cartridge air pulse exhaust filters, includes legacy PLC based control system with HMI, CIP Skid with pumps, automatic valves, tanks, detergent dosing, loose CIP piping and cleaning nozzles, inlet AHU with electric heat, duct flaps, process tower with top spray granulator/dryer bowl.

SKU: 4427-1

Item Name: BAUSCH Advanced Technology Group Vial Filling, Labeling and Inspection Line, New 2021

Manufacturer: BAUSCH Advanced Technology Group

Location: United Kingdom

Used 48" Walker Transfer Isolator, 316L stainless steel construction, 48" long x 24" wide x 30" high chamber, (2) glove ports, setup for vaporous hydrogen peroxide sterilization, with HEPA filtration and light, 120 volts, serial# BS-30013-1, built 1998.

Unused Howorth isolator, 316L stainless steel construction, approximately 9'6" long x 24" deep x 36" high inside chamber, single sided, 6 gloves with side access door, (2) 16" X 29" side access doors, 18" bottom outlet with cover, 4" bottom outlet with cover, CIP spray balls, (2) top mounted internal lights, 1 hp, 230/460 volt blower, on stainless steel stands with control panel, serial# 4344-200, new 2009.

Used 54" Flow Science vented safety enclosure, model FS2500-17BKDVA, serial# 12-N-15-01.

Used VWR ThermoFisher Scientific biosafety cabinet. 18% Buyer's Premium to be applied.

Used Malvern Nano-Z Zetasizer particle size analyzer, model ZEN2600, serial# MAL1224555, built 10/2019.

Used Nova Biomedical cell culture analyzer, model pHOx, serial# T07607151.

Unused 2,000 liter Pal Echelmann bioreactor, type STR-00643-01NRTLMD, with Mokon Pura Therm temperature controller, model PDT4318ASU02, bioreactor serial# STR-00643-01NRTLMD.005C, built 2022. Unit is Validated and Unused. 18% Buyer's Premium to be applied.

Used Millipore Milli-Q Gradient A10 Water Purification System.

Used 1,000 Liter Xcellerex single use bioreactor, model XDR-1000, stainless steel jacketed housing, jacket rated 100 psi at 150 f, bottom mounted agitator drive, project# 8968, serial# 19138, built 2010.

Used Freund Vector spray dryer system, model VSD-800, stainless steel construction, 800mm diameter chamber, cone bottom, two fluid nozzle atomizer, electrically heated with 6.5kw heater, cyclone fines collector and dust filter, 3 hp blower, 230 volt, serial# SD-106, built 2021.

Used 53 gallon (200 liter) Eagle Stainless tank, 316 stainless steel construction, model CTH-565-H, approximately 22" diameter x 35" straight side, open top with lid, flat bottom, (1) 4", (1) 2", (5) 1.5" nozzles on lid, on wheeled caddy, serial# 100946.

Used 250 gallon Befco reactor, stainless steel construction, approximately 42" diameter x 42" straight side, dish lid top with dish bottom (no lifting piston), internal rated 100 psi at 300F, jacket rated 75 psi and full vacuum at 250 F, (2) 4", (3) 2", and (1) .75" nozzles on top, 3" center bottom outlet, on wheels, serial# B10-1259, national board# 287, built 2010.

Used 79 gallon (300 liter) Inox reactor, stainless steel construction, approximately 24" diameter x 34" straight side, dish lid top with dish bottom, jacket and interior rated 30 psi and full vacuum at 300 F, 6" top access, with (1) 4", (1) 3", (2) 2" and (2) 1.5" nozzles on top, with bottom entering magnetic agitator, .75 hp with controls, 1.5" center bottom outlet, with load cells, all on portable frame, serial# 95011-2, CRN# K82555, built 1995.

Used Rannie 24 High Pressure Homogenizer

Federal Equipment Company sells biopharma bioreactors used for biochemically active reactions. Our inventory features bench-top fermenters and bioreactors for use in research and development through pilot and scale-up fermentation systems and all the way up to commercial production bioreactors. These fermenters and bioreactors are commonly made from stainless steel or glass. We offer used fermenters and bioreactors made by the top manufacturers like B. Braun, Applikon, Cytiva, ABEC, Thermo Fisher Scientific, Sartorius, Precision, New Brunswick, Pierre Guerin and many others.

Used 27 liter MBR AG bioreactor, 27 lilter total capacity, approximately 20 liter working capacity, approximately 200 mm diameter x 200 mm straight side bottom section, stainless steel construction, approximately 200 mm diameter x 500 mm straight side top section, glass construction, flat bolt on stainless steel top, bottom entering 3 tiered agitator with 6 blade turbine agitators driven by 1000 watt Servomotor, belt driven, 4 stainless steel baffles, ring sparger, top mounted reflux coil condenser, with controls, (3) peristalic feed pump system, MCS 10 controller, serial# 166.

Eppendorf New Brunswick BioFlo/CelliGen 115 Fermenter Bioreactor, 120 volt, serial# B115FI804092.

Used 10 liter New Brunswick fermenter, model BioFlo 3000, 316 stainless steel construction, 8.5" diameter x 14" straight side, flat bolt on top, dish bottom, 14 liter total capacity, 10 liter max working capacity, 3 liter min working capacity, temperature range from 5 C above coolant temp to 80 C, +/- .1 C or +4 C to 80 C, Magmotor agitator drive with two tier six blade paddle agitator, sparger ring, harvest tube, RTD sensor tube, provision for pH and DO monitoring, top mounted jacketed dust filter, 4 baffles, bottom stainless steel water jacket, (5) peristaltic pumps with PLC controls, 120 volt, mfg# m1227-1013, serial# 000787979, built 2000

Used 80 liter Pierre Guerin Bioreactor, project# H1M6020, 80 liter working capacity, 128 liter total capacity, " diameter x " straight side, flat bolt on top, dish bottom, rated 4 bar(58 psi)/- 1 bar(-14.5 psi) at 150° c (302° f) internal, rated 6 bar (87 psi) at 150° c (302° f), top mounted 0.25 kw agitator drive, skid mounted packaged system with monitoring system, mass flow meter, filter housing, pump and valving, vessel mfg# H1M602110-2, built 2006.

Used 200 liter Sartorius Stedim BioSTAT CultiBag single-bag-use Bioreactor, model STR-200-DW, stainless steel housing, jacketed for 2 bar at -10/+5- c, top mounted servomotor agitator drive, project# BB-8804079, serial# STR-0034, built 2009.

Used 200 liter (52 gallon) ABEC fermenter system, 316L stainless steel construction, approximately 24" diameter x 39" straight side, hinged dish top, dish bottom, baffles, rated 40 psi and full vacuum at 400° f internal, jacketed for 60 psi and full vacuum at 400° f, bottom entering agitator drive with, 3 hp, 208-230 volt motor with two tier 6 blade agitator, skid mounted controls, with vfd for agitator, vessel certified by Precision Stainless, serial# 6240, national board# 1267, built 1985.

Used 200 liter Sartorius Stedim BioSTAT CultiBag single-bag-use Bioreactor, model STR-200-DW, stainless steel housing, jacketed for 2 bar at -10/+5- c, top mounted servomotor agitator drive, project# BB-8804079, serial# STR-0034, built 2009.

Used 650 liter Sartorius Stedim FXC122953 ETO Palletank cubical jacketed mixing, product# FXC122953, stainless steel construction, 650 liter capacity, jacketed for 150 psi at 400 f, bottom driven magnetic mixer drive, Allen Bradley PanelView Plus 1000 Touch Screen Controller & Emerson Model 1056 Intelligent Four-Wire Transmitter, 208 volt, project # L05146, serial# BU-1308-1747, built 2014.

Used 300 sq ft BOC Edward freeze dryer, model LYOMAX 28, 316L stainless steel product contact surfaces with (13) 1170 mm wide x 1850 mm deep usable shelves, 115 mm shelf spacing, stoppering, external condensor with 300 kg ice capacity, refrigeration and vacuum skid with liquid natural gas refrigeration, model AV-LUS BOC Edward loading / unloading skid, 480 volt with controls, freeze dryer serial# MTE1930, built 2004.

Used Perkin Elmer Paragon 1000 PC FT-IR Spectrometer, benchtop design, serial# 38716.

Used Dorr-Oliver High Pressure Liquid Chromatograph (HPLC), Model XP Prep 15LPM, explosion proof design, Class 1 Div. 1, Group D with pumps and columns, 230 volt.

New Sartorius Hipersep Flowdrive Pilot Preparative HPLC Chromatography System, serial number 3998-H, built 2022.

Used 10 Liter Diosna high shear mixer, model P/VAC 10/60, stainless steel construction, 10 liter jacketed bowl, side discharge with pneumatic plug valve, with controls, 480 volt, serial# 670-031, built 2005.

Used M&O Perry inline liquid vial filler, Model P-1510, stainless steel construction, speeds from 35-45 vials/minute, set up with filling, plug inserting and capping stations, Flexicon peristaltic fill pump, V change conveyor, change parts for 13 and 20mm plugs/caps with bowl feeders, vial infeed rotary table, and discharge rotary table, serial# P-888, built 2006.

Used Watson Marlow PPT pump system, model MGS, with (2) two Easy Load Masterflex peristaltic pumps, stainless steel enclosure, 230 volt, serial# 021808.

Used Symyx Technologies Powdernium automated powder dosing system, model TruFlex 200H, for use with capsules, vials, tubes, wellplates, reactor blocks, crucibles, etc., with robotic filler arm, with parts, 115 volt, serial# TF 07113.

Used Aeromatic-Fielder fluid bed dryer, model STREA-1, with stainless steel expansion chamber, no top spray nozzle, 1.5 kw/h heater, 1 hp blower, 110 volt, serial# 11462. As Is.

Used AmericanBrand ultrasonic cleaner, model ME4.6, stainless steel construction, 120 volts, serial# 77M12603.

Used Cozzoli vial washer, model GW24, stainless steel construction, touch screen controls, with Allan Bradley MicroLogix PLC controller, serial# GW24-56.

Unused 3 sq meter / 33 sq ft SP Scientific Lyophilizer freeze dryer, model LyoConstellation S30, 316L stainless steel product contact surfaces with (8) approximately 20" wide x 30" deep shelves, 3" shelf spacing, -55°C - +65°C shelf temp range, top down stoppering, 3.48 sq meter / 37.5 sq ft condenser, skid mounted with 20 hp refrigeration compressor, R410A refrigerant, Leybold vacuum pump, unit is unused from manufacturer, 480 volt, part# 100023909, serial# 3281480.

Used Perkin Elmer Optima 8000 ICP-OES double monochromator optical system, benchtop design, with preselection and high-dispersion monochromators, integrated pumps, 230 volts, serial# 078S1309053C.

Used Fitzpatrick L1A Fitzmill, stainless steel construction, bench top design with integrated motor controller, serial# 288, built 2005.

Used 100 liter Feldmeier reactor, stainless steel construction, hinged dish top, dish bottom, rated 60 psi at full vacuum at 350 f internal, jacketed for 120 psi at full vacuum at 350 f, bottom mounted .34 hp magnetic agitator drive, 230/460 volt, on legs, serial# S45002, national board# 2637, built 2003.

Unused 3 sq meter / 33 sq ft SP Scientific Lyophilizer freeze dryer, model LyoConstellation S30, 316L stainless steel product contact surfaces with (8) approximately 20" wide x 30" deep shelves, 3" shelf spacing, -55°C - +65°C shelf temp range, top down stoppering, 3.48 sq meter / 37.5 sq ft condenser, skid mounted with 20 hp refrigeration compressor, R410A refrigerant, Leybold vacuum pump, unit is unused from manufacturer, 480 volt, part# 100023909, serial# 3281480.

Used Brookfield viscometer, model LVDV-II+PRO, 115 volt, with (2) spindles sets and case, serial# RTP74342.

Used Flexicon vacuum loader, stainless steel construction, hopper receiver with integrated dust collection, Gash rotary lobe blower, model JG136, with 10 hp, 208-230/460 volt motor and rotary air lock.

Used Flexicon bag dump station, stainless steel construction, with integrated dust filter, on legs.

Used Keith Machinery Twin Shell Blender

Used ProDieCo Tablet sorter with tooling and EHS Drum Lift, Model CL210, Serial 118061746202

Used Rannie 24 High Pressure Homogenizer

Used Agilent 1260 Infinity II HPLC System consisting of 1X1260 Isocratic Pump (ISO) serial# DEAEH01141 1X 1200 Analytical Light Scattering (ALS) serial# DE64764961 1X1260 Multicolumn Thermostat (MCT) serial# DEAED10460 1X 1100 Refractive Index Detector (RID) serial# DE43801720.

Used Kramer vertical spiral deduster, Type E2000, with C820 controller, job# 205629, 240 volt, serial# E2000-0161, built 2008.

Used Sotax Disintegration Tester, model DisiTest 20, serial# 0204.

The JSM-7401F is JEOL's highest resolution SEM and is a field emission scanning electron microscope (FESEM) incorporating a cold cathode field emission gun, ultra high vacuum, and sophisticated digital technologies for high resolution, high quality imaging of micro structures.

New 50 cu ft AIM Blending ribbon blender, model RB-50, 304 sanitary stainless steel construction, #4 internal finish, buffed matt external finish, 56 cu ft total capacity, 50 cu ft working capacity, approximately 37" wide x 76" long x 42" deep trough, double ribbon agitator, full hinged top cover, outboard roller bearings, sanitary split packing gland shaft seals, 6" center bottom outlet with manually operated slide gate discharge valve, 15 hp, 230/460 volt motor drive producing approximately 45 rpm shaft speed, on 304 stainless steel stand with approximately 5" discharge height, serial# 050-416-SS-FG-RB-6S-2204-15V, built 2022 New and Unused.

New 50 cu ft AIM Blending ribbon blender, model RB-50, 304 sanitary stainless steel construction, #4 internal finish, buffed matt external finish, 56 cu ft total capacity, 50 cu ft working capacity, approximately 37" wide x 76" long x 42" deep trough, double ribbon agitator, full hinged top cover, outboard roller bearings, sanitary split packing gland shaft seals, 6" center bottom outlet with manually operated slide gate discharge valve, 15 hp, 230/460 volt motor drive producing approximately 45 rpm shaft speed, on 304 stainless steel stand with approximately 5" discharge height, serial# 050-416-SS-FG-RB-6S-2204-15V, built 2022 New and Unused.

Used O'Hara Labcoat 3 O'Hara Labcoat III Coating System. 2005. 18/80 KG@1kh/L Capacity, 60Hz, 460V. Aqueous Use Only. S/N:3710.

Used Fitzpatrick D6A 6" Fitzmill. Stainless Steel Auger Feeder. S/N: 12226.

Used Ceia THS/PH21N Pharmaceutical Metal Detection System. Made in 2010. S/N: 21000244022.

Unused MG2 robotic palletizer, model GRP, 6 axis robot with 50 kg capacity, 15 cycles/minute, 150 x 100 x 100 mm - 600 x 400 x 400 mm case size range, 800 x 1,200 mm (EU), - 1,000 x 1,200 mm (US) pallet size, 1,600 mm max full pallet height (including pallet). Unit is unused, FAT performed.

Used Stokes Capsule Polisher, Model 180-8 Capable of 400,000 capsules per hour. Designed for cleaning and polishing hard gelatin capsules in a single step. It eliminates the double handling and extra space requirements of the conventional process using a lamb's-wool belt or salt-and-pan method. This unit produces a finished product well within pharmaceutical standards for cleanliness and brightness. Vacuum required 50 cfm at 21'' static pressure serial# 681140.

Used ACG Pam Mini Filled Capsule Sorter, model MCS100, stainless steel construction, 9" x 12" sorting area, serial# MCS-559.

Used K-Tron powder delumper hopper, stainless steel construction, with .5 hp, 230/460 volt motor drive with VFD controllers.

Used 19 MM APV Baker Perkins twin screw co rotating extruder, model MP-19-TC, 19 mm diameter screws, 40:1 l/d, electrically heated, water cooled barrel, split barrel design, 2 kw dc motor, 500 rpm screw spped, with Ktron main feeder, (2) Brabender auxiliary feeders, (3) Zenith melt pumps, FTS chiller, external control panel, with associated screws, screw elements, control panel, 220 volt, CE rated, APV serial# NEF990028-701/1, Baker Perkins serial# TS99535, project# 99TS196, built 1999.

Unused Ktron vacuum loading system, Series 2400, with model 2415 receiver, with bottom mounted slide gate valve, 5 hp roots blower, and fines collector.

Used Chase-Logeman aseptic fill, checkweigh, stopper, and aluminum cap/seal monoblock machine, model FSASCW2-2205. A single, compact monoblock machine that features stainless steel construction, variable speed design, 1-100 ml fill capacity, designed for up to 20 mm stoppers (plug and lyo style), tray feed for vials, feed pump, automatic vial indexing, bowl feeders for plugs and caps with plug feeder/inserter, crimp style capper, with plc controls and touchscreen HMI, and CE rated. Serial# 9560612 includes change parts for ml vials - 2, 5, 15, 20, and 50.

Unused Bosch Aseptic powder filling line, speeds up to 325 vials/minute, set up to fill 20 mL vials, .5 - 3.5 gram fills, 230/400 volt, 3 phase, Siemens S7 and Elau PacDrive controls, system built 2019, installed, commissioned with IQ/OC and not used.

Used 100 Gallon Ross Triple Motion Vacuum Mixer, model PVM-100, 304 stainless steel construction, anchor agitator with bottom and sidewall scrappers, driven by 10 hp xp motor, disperser driven by 10 hp, xp motor motor, emulsifier driven by 25 hp xp motor, motors 230/460 volt, XP rated class 1, div 2, with (2) 100 gallon stainless steel jacketed mix can, jacket rated 100 psi, vacuum cover, air over oil lift, with Ross DS-100 hydraulic lift and press-out unit, serial# 76747, built 1999.

Used 3 cu ft Patterson Kelley twin shell blender, stainless steel construction, rated 85#/cu ft maximum material density, liquid solids bar with motor drive, perforated covers, 6" diameter discharge with valve, on stand with motor drive, serial# 289220.

Used Eriez metal detector, model EZ-5, type 8X24HIM, style 9504305, 8" x 24" aperture, with integrated plastic chain conveyor, driven by .5 hp motor, Eriez serial# 145784.

Used GlobePharma Mini Blend V-Blender, model MNB-1, with (3) stainless steel shells, 110V, serial# 12066812.

Used Korsch rotary tablet press, model PH250/25, 25 station, 20 Kn pre compression, 80 Kn main compression, 16 mm max tablet diameter, 18 mm max depth of fill, single side with force feeder, rated up to 180000 tablets/hour, serial# 1.0031.94, built 1994.

Used GEA Niro sanitary spray drying system consisting of: Model PSD4 GEA Niro spray dryer, approximately 8' inner diameter x 8'6" straight side x 8'9" deep cone bottom spray dryer chamber, 316 stainless steel product contact surfaces, mirror internal finish, with fluid nozzle and centrifugal rotary atomizers, approximately 17" diameter, sanitary stainless steel cyclone fines collector, approximately 6' diameter dust collector, sanitary stainless steel construction, pulse jet, cone bottom, set up for electric or steam heating with Watlow, 145 kw electric heater with external Hepa filter, air handler with steam coil and Watlow 37.25 kw electric heater, internal Hepa filter, designed for nitrogen purge, 7.5 hp process air supply blower, 7.5 hp process air return blower, set up for solvent recovery with condensor(less receiver pot), solution feed pump with Micro Motion flow meter, inter connecting pipe work from dryer, to dust collector and cyclone, GEA Niro control panel and HMI panel, 460 volt, 3 phase, GEA Niro fabrication# 099-0013-00, built 1999.

Used Quadro Comil, model 194, stainless steel construction, with beater and 5 hp, 230/460 volt motor on legs, serial# 194-1373.

Used Genesis Machinery crimper, model LW, up to 6" diameter x 8" high vial size range, 110V, serial# LW343, built 2000.

Used 4 quart GlobePharma MaxiBlend twin shell blender, model MB-IVV, with (2) 4-quart stainless steel blending shells, 110 volt, serial# 041531248, built 2015.

Bausch + Strobel SP-100 Powder filling Machine with control cabinet, stainless steel construction, with filler funnels and auger, serial# 51181, built 1998.

Used 50 cu ft Custom Powder Systems bins, model 610185, stainless steel construction, 48" diameter x 36" straight side, approximately 30" cone, with 20" top access, 8" bottom outlet, on framework stand with provisions for forks, serial#s 5538-9, 5538-2, 5538-13, 5538-5, 5538-3.

GlobePharma MaxiBlend, model MB-IVV twin shell blender, with (2) 4-quart blending shells, 110-120 volt, serial# 041531248, built 2015.

Used IMA capsule checkweigher, model Precisa 120, designed to handle hard gelatine capsules, rated up to 120,000 capsules/hour, capsule size range from 40 mg to 2000 mg, +/- 2 mg accuracy, serial# PA1031, built 1999.

Used 125 liter Integrated Biosystems Cryovessel, 316L stainless steel construction, approximately 20" diameter x 30" straight side, removable dish top dish bottom, internal rated 50 psi and full vacuum at 280 F/ 15 psi at -112 F, jacket rated 65 psi and full vacuum at 280/-112F, with central heat exchanger arranged in (X) orientation, rated 65 psi and full vacuum at 280/-112F, with forklift access, certified by Precision Stainless, serial# 202458-2, National Board# 9243, built 2001.

Used IMA Switftpack lane counter, model SPCB12P3PTS Twin, dual 12 lanes each heads mounted on common frame, 230 volt, serial# M4961, built 2007.