IBCs (Intermediate Bulk Containers)

Servolift IBCs are the finest you can purchase - fit finish and quality are all world class. To offer our clients the most flexibility we have standards in all capacities ranging from 0.5-liters to 4000-liters in Round, Rectangular and Square geometries. We also offer fully customized solutions for more demanding applications such as high containment systems.

SERVOLIFT offers a whole host of configurations to suit every product and process such as: blending baffles, removable bin frames, casters, purge ports and high containment valves and systems.

Standard Features:

Corners: The corners of Servolift IBCs, whether 5-liters or 3000-liters are always made with a 2" radius. This large surface bend allows for the easiest cleaning, insuring that cross contamination is not caused by the IBC design.

	This is an example of a fully buffed exterior corner surface. Full buffing gives an attractive look over strip polishing, but costs more without having any GMP benefits.
	This is an example of a strip polished exterior corner surface. Strip polishing allows the superior mill finish to not be touched. Servolift polishes the surfaces in perfectly straight lines fora uniform and attractive look.
	This is a view of the inside corner. As with the outside, interior welds re ground smooth and flush to the sheeting surface. Typically we certify the interior finish to Ra 15 micro-inch as standard.

This is a close up shot of an exterior weld on our IBCs that has been ground to flush and then strip-polished to a #220 grit. Further polishing is available to any Ra value our client's request.

Manways and Ports: Servolift offers a complete line of Manways & Ports for our IBCs. For the Pharmaceutical Industry we prefer to use our lightweight stamped lid system which is not only easy to remove and clean, but also weighs very little. Clamping is very simple from our one-piece over-center clamping ring (no fighting with the connection) and the clamp has an additional safety-tamper lock.

	Our manway rings come in several styles, however, for Pharmaceutical and other industries we offer a super clean fully welded design which is perfectly fitted to the Bin top.
	SERVOLIFT offers a wide arrangment of manway lids, from high sanitary design for pharmaceutical products to lower cost yet very easy to clean designs. Lids are available in the following sizes as standard: 4.7", 5.9", 7", 9.8", 12.4", 15.75", 17.7", 19.7", 22", 23.6" and 28" other sizes are available also.

Frames: We specialize in making bin frames that are not only robust and easy to clean, but also custom tailored to your mode of handling. For example some customers require the bins to be used on roller conveyor, others have special width docking stations and some customers use AGV systems to move the IBCs around - for each application we will build a different and correct frame system.

Our frames are made from totally enclosed tubing, we prefer round vertical legs, however, we also offer square tubing. We use FDA approved white plastic feet recessed into each leg so you floors are not damaged during handling.