CG1100 Oxygen Analyzer

Click Here To Download:
•Datasheet: CG1100 Oxygen Analyzer

The CG1100 is a smart sensor capable of detecting oxygen in your sample from 0.1 ppm to 100%. This analyzer is designed specifically for use in applications where fast response over a wide range of oxygen is required. The sample can be pulled through the analyzer using an aspirator (optional) thereby eliminating the need for a sample pump. The CG1100 uses a zirconium oxide sensor that provides quick response, is non-depleting, and will not fail to zero reading, thereby protecting your process.

Key Features:

• Fast Response over a Wide Operating Range - Your system will respond rapidly over an operating range of 0.1 ppm to 100% oxygen.
• Easy to Integrate into Your Host Controller and Data Acquisition System - The CG1100 is equipped with an RS-232 and two RS-485 ports: It comes with configurator software for initial setup of operating parameters and accepts user-provided software for efficient integration with a host controller, or Dycor System 2000 software to record and process data.
• Integral Mass Flow Meter - Reads sample and calibration gas flow.
• Optional System 2000 Software Available - Provides enhanced interface and process monitoring with graphical user interface for Windows 95/98/2000/NT/XP format.
• Zirconium Oxide Sensor - Your system will not fail to zero oxygen reading. It is always protected something not possible with other sensor technologies.
• Compact - 8" x 8" x 8" cube houses all electronics, RS-232 port, (2) RS-485 ports , I/O port and analog output (4-to-20 mA) isolated.
• Optional Vacuum Generator (Aspirator) - Uses plant air to pull the sample through the sensor eliminating the need or a sample pump.

Applications:

• Oven/Furnace Atmospheres
• Blanket /Purge Gases
• Welding Gases
• Food Packaging
• Component Aging Chambers
• Carbon Dioxide Purity
• Nitrogen Purity

Click Here To Download:
•Datasheet: CG1100 Oxygen Analyzer