Clean Work Cabins Datasheet

Weighing cabins protect the operating personnel when weighing or filling products containing active agents. The weighing precision is not affected. At the same time, the products are kept sterile and particle free.

The weighing cabins can be used for on-site tables as well as floor scales. Weighing cabins operate with low-turbulence displacement flow and fulfill the DIN EN ISO 14644-1 class 5.0 requirements or M3.5 (100) according to US Fed. Standard 209E.

Weighing cabins have a rectangular housing design whose upper horizontal segment is supported at the end with pedestals on both sides. Instead of the pedestals, the ceiling module can be suspended from the ceiling on-site. The installed speed controlled radial fan takes in the air through a prefilter positioned near the floor and pushes the air through an HEPA-filter and air discharge element into the work area , flushing the area with a clean air and a low-turbulance vertical displacement-flow. Transparent PVC curtains are utilzed for the side partition of the working area. The front side (operating side) remains open.