Product/Service

Delta Freeze Dryers

Source: IMA S.p.A.
Freezing and drying inside ice condenser chamber (process A) on 10 temperature controlled shelves (ø 200 mm, total area = 0.31 m2, distance between shelves = 25 mm - can be varied by removing single shelves)

Click Here To Download:
•Brochure: Laboratory Freeze Dryers Advanced Processes

Laboratory freeze dryers increasingly demand high performance process control that is an integral part of commercial freeze drying in the high-tech industries. The IMA laboratory freezer dryers are used for advanced applications:

  • compact, high-performance laboratory and technical equipment requiring minimal space
  • modular systems permit capacity expansion with a wide variety of accessories compact, high-performance laboratory and technical equipment requiring minimal space
  • modular systems permit capacity expansion with a wide variety of accessories innovative, easy-to-use interface LSC with PC connection for process control and documentation
  • freeze-dryer system fulfi lls FDA and cGMP-Guidelines, interface fulfills the current requirements according to GAMP, Lyo-software LPC-16 also meets US CFR requirements
  • drying chamber is located directly above the ice condenser chamber; maximum cross-sectional area results in high sublimation performance and shortest possible process-time
  • ice condenser chamber with inner condenser coil of high quality steel allows for efficient vapour deposition

Delta Freezer Dryer Specifications

  • Freezing and drying inside ice condenser chamber (process A) on 10 temperature controlled shelves (ø 200 mm, total area = 0.31 m2, distance between shelves = 25 mm - can be varied by removing single shelves)
  • Freezing and drying inside ice condenser chamber (process A) on 4 temperature controlled shelves with stoppering device (ø 250 mm, total area = 0.18 m2, distance between shelves = 45 mm - can be increased to 110 mm by removing one shelf)
  • 2 drying chambers with 24 ports for flasks, wide-neck filter bottles or distributors for ampoules
  • 10 heatable shelves (ø 200 mm, total area = 0.31 m2, distance between shelves = 25 mm - can be varied by removing single shelves) additional ports for 12 round bottom flasks, wide-neck filter bottles or distributors for ampoules
  • 4 heatable shelves with stoppering device (ø 250 mm, total area = 0.18 m2, distance between shelves = 50 mm - can be varied by removing single shelves) additional ports for 12 round bottom flasks, wide-neck filter bottles or distributors for ampoules
  • 8 heatable shelves (ø 375 mm, total area = 0.88 m2, distance between shelves = 48 mm - larger distances can be obtained by special order)