Product/Service

Fluke 718 Pressure Calibrator

Source: Fluke Corporation
The Fluke 718 provides the total solution for process instrument technicians to accurately and powerfully test and calibrate pressure transmitters

The Fluke 718 provides the total solution for process instrument technicians to accurately and powerfully test and calibrate pressure transmitters. The self-contained Fluke 718 pressure calibrator has a built-in pressure/vacuum hand pump, with vernier and bleed valve. Using the 718 Pressure Calibrator, pressure and loop current can be measured simultaneously. A 24 V loop power supply is available on the calibrator, which boasts a wide range of selectable measurement units, Min/Max and Hold functions, and a simple, push-button user interface. The single unit is light and easy-to-use, while also providing the reliability and value for which Fluke Corporation is known.

The Fluke 718 Pressure Calibrator performs P to I transmitter calibrations with one easy-to-use instrument. The calibrator will make the technician's life easier by eliminating the need to carry both a pump and a pressure calibrator.

The pressure measurement is accurate to 0.05% of full span, using a self-contained internal pressure sensor. It will measure current with 0.025% accuracy and .001 mA resolution. The 718 is the most powerful and accurate tool available, providing pressure measurement to 10,000 psi/700 bar using any of 27 Fluke 700 Series Pressure modules.

With the introduction of the 718 Pressure Calibrator, Fluke has maintained its commitment to safety and quality -- the calibrator is CSA certified and CE marked. Like the entire line of Fluke products, the Fluke 718 is compact, portable, rugged and reliable for use in the field. Weighing only 1.6 pounds (737 grams), the calibrator is 8 ¼ in. long (210 mm) x 3 ¼ in. wide (63 mm)
x 2 ½ in. deep (62 mm).

The 718 pressure calibrator is the latest addition to the Fluke Process Tools family of products that also includes the 744, 743, and 741 Documenting Process Calibrators, the nine models within the 710 series Process Calibrators, the 705 Loop Calibrator, and the 787 ProcessMeter®.

The Fluke 718 Pressure Calibrator is available from Fluke distributors and representatives worldwide. It ships complete with holster, TL75 test leads and AC20 test clips. The user's manual is available in 14 languages, including Spanish, French, German, Chinese and Japanese.