09.16.23 -- Packaging And Inspection Product Showcase

Simplify label print, inspection, and accountability by integrating three critical operations into one system. The LABELQ is a desktop pharmaceutical print and inspection verification system designed for small- and medium-batch print jobs. Ensure regulatory compliance, lower production costs, and reduce the risk of recall, product mix-up, and poor label quality with the LABELQ.

The United States Pharmacopeia USP 1207 guidance has been revised, encouraging the preference for deterministic, quantitative, and reliable non-destructive technologies to comply with quality standards. The latest evolution in the package integrity testing of parenteral products is PTI’s patent pending Microcurrent HVLD technology and vacuum decay technology.

The BEC 300, manufactured by Uhlmann, is the eighth blister line at Ropack Pharma Solutions. The single-lane unit integrates blistering, cartoning, and serialization. Explore product details of the Uhlmann BEC 300.

The injectables market is a very demanding market, with high standard requirements. i-Dositecno offers a high-standard solution for medium and low-speed solutions with very high requirements. Learn more about this aseptic pharmaceutical filling equipment.

The USP <1207> and ASTM (F-3287-17) recognized mass extraction technology from Pfeiffer Vacuum Inc. works on the principle of rarefied gas flow. Testing takes place in vacuum conditions to attain higher sensitivity. This patented technology type of testing is particularly suitable for pharmaceutical packaging such as IV bags, pouches, or glass vials. 

The investment you make in your cleanroom facility should reduce your manufacturing risk and guarantee your performance. With a singular focus in providing the most flexible cleanroom technology solutions for over 35 years, AES is the cleanroom expert.

Explore considerations in the selection process as per the ASTM E3051-16 Standard Guide to help you choose a bag chamber that ensures optimal performance for your application and user requirements. Learn about the variety of different materials, volumes, port configurations, and types of bag chambers offered by Qosina.

Nikka Densok USA offers complimentary feasibility testing for your CCIT project. Whether the need is for stability testing or initial inspection capability, Nikka’s high voltage leak detection (HVLD) systems are here to support your CCIT needs. Learn more about Nikka Densok’s HVLD, the most reliable, repeatable, and productive inspection method.

Weiler Engineering’s ASEP-TECH blow/fill/seal machines are ideal for processing temperature-sensitive products such as biological and protein-based materials — providing a level of enhanced sterility assurance. These blow/fill/seal packaging machines cover virtually every segment of the respiratory therapy marketplace.

Used Uhlmann horizontal cartoner, model C 2205, speeds up to 250/ minute, 150 mm x 100 mm x 90mm max cartoner size, dual blister feeder stations, with (1) powered and (1) drop feeder, Laetus scanner, 3/60/480, serial# 104, built 1994.

The Legacy CS-400 from GF is a small-center, high-speed end-load pharmaceutical cartoner for small-medium formats up to 400 cpm.

Dec’s aseptic filling equipment is configured for seamless integration into existing production lines and designed to accommodate various containers, including sterile RTU/RTF (ready to use or fill) bottles, vials, cartridges, pre-fillable syringes, and Dual Chamber Systems (DCS). 

Thanks to its weighing terminal IT 9000 as well as its dosing device Multi-Dosimat, JetSolutions SA offers reliability and precision for filling powders or granulates into IBCs, boxes, bags, trucks, etc.

Vaccine development trends emphasize the need for adaptability and accessible production facilities. Remote manufacturing tackles these challenges, facilitating decentralized vaccine production and rapid responses to health crises. Germfree remains at the forefront of these trends by providing configurable solutions that satisfy regulatory requirements and end-user needs.

The HPAPI Capsule Inspection System from Flow Sciences Inc. is designed to provide personnel protection during the inspection of filled capsules containing Highly Potent Active Pharmaceutical Ingredient (HPAPI) powder. The system accommodates space for an analytical weighing balance and capsule inspection bats (paddles).

Through its historical Ompi brand, Stevanato Group produces glass vials from Type I glass tube in different sizes and capacities, in bulk or ready-to-fill configurations. With full control over geometry and surface chemistry, these vials can be tailored to meet the different needs of biopharmaceutical customers.

The SA25 is a gloveless system designed to provide an optimal aseptic process with a standardized flexible filler capable of producing vials, syringes, and cartridges.  Its advanced automation reduces the risk of product contamination, for it eliminates the need for human intervention.

A track and trace and checkweighing combination solution aimed at small and mid-market pharmaceutical manufacturers in the pharmaceutical and cosmetics industries, the CT33 system gives operators a deep level of integration between mark and verify, serialization, and precision weighing capabilities.