Pharmaceutical Metal Detection Systems: Tablets & Capsules
Designed to meet the exacting standards and regulations of the pharmaceutical industry, METTLER TOLEDO Safeline pharmaceutical metal detectors provide the ultimate solution in fully integrated product inspection and rejection systems for tablets, capsules, powders and granules. Our metal detection systems are designed to detect all metal contaminant types, including ferrous, non-ferrous and even the most difficult-to-detect non-magnetic stainless steels.
METTLER TOLEDO Safeline pharmaceutical metal detector systems are designed to offer maximum flexibility in process areas. A compact footprint enables systems to be inserted into areas where space is restricted. Robust, low profile, fully rotating castors provide ease of mobility, enabling the system to be used in multiple locations. Flexibility is further enhanced by the ability of the metal detection head to be adjusted easily (without the need for tools) in all three axes to suit any configuration.
Meeting the requirements of FDA 21 CFR part 11 can be a challenge in some pharmaceutical processing environments. FDA metal detection limits support regulatory action against products with metal fragments 0.3 inch (7 mm) to 1 inch (25 mm) in length. Our Tablex-PRO pharmaceutical metal detector supports full compliance with standards and is designed to detect all possible metal contamination encountered in pharmaceutical manufacturing processes, including ferrous, non-ferrous and even the most difficult-to-detect non-magnetic stainless steels (grade 316). Contaminants less than 0.3mm in diameter can be readily detected and rejected.