Product/Service

WCB S200 Series Centrifugal Pump

Source: SPX Flow Technology
In the Bio-Pharmaceutical industry, these pumps are manufactured to ASME BPE specification criteria. All product contact components are machined from wrought <5% ferrite level, 316L SS, and feature a 20 Ra product contact surface finish. Material heat numbers are available on all product contact components.

Click Here To Download:
•Product Sheet: S200 Series All-Machined Centrifugal Pumps

In the Bio-Pharmaceutical industry, these pumps are manufactured to ASME BPE specification criteria. All product contact components are machined from wrought <5% ferrite level, 316L SS, and feature a 20 Ra product contact surface finish. Material heat numbers are available on all product contact components.

Standard Features:

  • High efficiency, low NPSHR design for a wide variety of applications
  • One size mechanical seal for all 200 Series models; reducing parts inventory and cost (commercial seals available)
  • Integral impeller/shaft design for fewer parts, greater concentricity and easy maintenance
  • Close coupled pumps use NEMA JM Frame motors with larger diameter shafts and bearings (compared to C Frame motors)
  • All WCB 200 Series impellers are made from wrought 316L SS
  • Horizontal, vertical, and 45° angle discharge port orientation available

Optional:

  • 15 Ra., electropolish, and passivation product contact surface finishes
  • WFI seal arrangements
  • Double mechanical seals
  • Casing drain
  • SS motors

Click Here To Download:
•Product Sheet: S200 Series All-Machined Centrifugal Pumps