Datasheet: ZMS/ZVS Series Membrane Filter Housings

The 316L stainless steel in-line ZVS series and T-line ZMS series accept one CUNO 70002 style filter element (double 226 o-rings with bayonet locking tabs) in 10", 20", 30", or 40" length. All ZVS and ZMS filter housings are equipped with ½ inch sanitary vent and drain ports; vent and drain valves are available as optional accessories. Model ZMS is also equipped with a 1½ inch sanitary gauge port. The inlet and outlet connections are 1½ inch sanitary fittings for the ZVS model and 1 inch sanitary for the ZMS model.

ZVS and ZMS housings offer the highest quality electro- polished surface finish for ease of cleaning. Wetted surfaces are further electropolished to a 10 microinch Ra surface finish to limit bacterial and particulate adhesion.

An improved bayonet cartridge interlock design allows easy clean - ing, and a positive locking retention mechanism secures the filter cartridge even during back pressure surges. A 316L stainless steel clamp secures the housing base and dome permitting rapid filter changeouts. Each filter housing is hydrostatically tested to ensure long term efficient operation even in the most demanding environ - ment. All housings are supplied with silicone gaskets that comply with CFR 21 requirements for direct food and drug contact.