Facilities Products & Services

  1. FIT Facility Program From CRB
    9/7/2017

    Biopharmaceutical facilities continually experience the combined challenges of efficient, uninterrupted production, while maintaining consistent regulatory compliance. Daily manufacturing demands can promote actions such as short-term patches on deficiencies, retention of inefficient processes and technologies, deviation from SOPs, rushed expansions and/or process modifications, and potential problems being ignored.

  2. Pharmaceutical Sterilizer: ADV
    8/11/2017

    The sterilizer type ADV, is designed for use in the pharmaceutical and biotechnological industry for production, laboratory and R & D applications.

  3. Sterilization Of Pharmaceutical Liquids
    8/11/2017

    The sterilizer type SDR, is designed to sterilize liquids in open, semi sealed or 100% closed containers according to the steam-air mixture process. The big advantage of this process is a complete dry product at the end of the cycle.

  4. Pharmaceutical Sterilization and Depyrogenation Equipment: HQL 6000-8000
    8/11/2017

    The safe and reliable sterilization and depyrogenation of pre-cleaned containers is the most important pre-treatment step in the pharmaceutical process.

  5. DMA™ 35 Portable Density Meter
    8/9/2017

    Digital density measurement is about to further evolve: With the new DMA 35™ from Anton Paar. The robust portable density meter needs only 2 mL of sample for the measurement and delivers results within seconds. Simplify your measurements in the field with DMA 35™.

  6. Vertical Blenders For Manufacturing
    7/14/2017

    Ross V-Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being split and intermixed as the shell rotates. Normal cycle times are typically in the range of 15 minutes, however can be less depending on the difficulty of blending.

  7. Double Cone Blender For Manufacturing
    7/14/2017

    Ross Double Cone Blenders design is most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of blending.

  8. Industrial Dry Blending and Drying Equipment
    7/14/2017

    Ross is the leading supplier of Ribbon, Tumble and Vertical Blenders for dry powder blending and drying for the process industries. Many products including pharmaceuticals, foods, chemicals, fertilizers, plastics, pigments, and cosmetics are manufactured in Ross dry blending equipment.

  9. Environmental Monitoring Systems
    6/28/2017

    High-quality standards in production and storage necessitate a comprehensive monitoring system that delivers measured data reliably. The adaptive RMS Rotronic Monitoring System is designed for a for a wide range of applications.

  10. Environmental Monitoring Systems Converter for Pharmaceutical Manufacturers
    6/28/2017

    The RMS converter allows integration of digital third-party devices. The hardware collects the data of all third-party components and, if required, controls them. In this way Rotronic devices from existing networks as well as web cams or third-party devices with a public protocol can be integrated. Our customers are therefore able to implement hardware extensions easily on a project-specific basis. The only requirement is that the devices have an Ethernet interface.