FEATURED USED EQUIPMENT

1. Used GEA Pharmaceutical Spray Dryer: MM-PSR 12/1/2025

   Used GEA Mobile Minor Spray Dryer, Model MM-PSR, stainless steel construction, 0.8 meter diameter chamber, GEA Niro nozzle atomixer, cone bottom, with top expansion chamber, with inlet HEPA filter housing, cyclone fines collector, discharge filter housing, and .95 kw blower, control panel with Allen Bradley Panelview1500 HMI, project# 1093-2412, built 2017.

2. Used BMT Steripro Pharmaceutical Steam Sterilizer 10/2/2025

   Brand new BMT Steripro cGMP steam sterilizer, model SPV9612-2AGV. The Steripro SPV9612-2AGV is a high-performance steam sterilizer designed for pharmaceutical and biotech production environments where repeatability is critical. Featuring a polished 316L stainless steel chamber and sanitary piping, it ensures durability and compliance with cGMP standards. Equipped with industrial-grade PLC control systems and high-grade vacuum pumps, it delivers precise and repeatable sterilization cycles with temperature uniformity better than ±0.5°C. Serial# AC22053, built 2022. The unit is already packaged, and installation is included with the sale for seamless setup and operation.

3. Used Lytzen Pharmaceutical Depyrogenation Oven: ISO Class 5 LDF-380 10/2/2025

   Brand new Lytzen depyrogenation oven, model LDF-380. The Lytzen LDF-380 is a high-performance depyrogenation oven designed for ISO Class 5 (formerly Class 100) cleanliness throughout the cycle. With a fully welded stainless steel chamber, it operates at up to 280°C for effective pyrogen removal. Its forced air convection system ensures uniform heat distribution, while a semi-automatic flush door enhances ease of use. Serial# A20221074, built 2022. The unit is already packaged, and installation is included with the sale for seamless setup and operation.

4. Used Pharmaceutical Bottle Filling And Packaging Line 10/1/2025

   Used Pharma Packaging System bottle filling line consisting of: - Accumulation feed table, stainless steel construction. -Pharma Packaging Systems lane counter, model 8-1 Vitacount, (8) lane, stainless steel product contact surfaces, single filling station, with reject, with HMI touch screen, 230 volt, 50 Hz, serial# PPS 544, built 2013. -Accumlation discharge table, stainless steel construction, -Domino A420i coder, serial# AST00117225, -Enercon induction sealer, model Super Seal.

5. Used Freund Vector Roller Compactor With Mill: TFC-220 10/1/2025

   Used Freund-Vector TFC-220 Pilot Scale Roll Compactor/Granulator, stainless steel construction, 20g - 20kg/hour capacity, with 200mm diameter x 20mm roll face rolls, grooved rolls, product hopper with integrated tapers de-aeration screw, with bottom mill, operator HMI touch screen, 230 volt, serial# RC-330, built 2012.

6. Used Stokes 45 Station Pharmaceutical Tablet Press 10/1/2025

   Used Stokes BB2 Tablet Press, 45 station, B-tooled, dual sided, 4 ton compression, feed frames with hoppers, 7/16" max tablet diameter, 11/16" max depth of fill, 4200 tablets per minute max speed.

7. Used 600 Liter Pfaudler Glass Lined Receiver Tank 10/1/2025

   Used 600 Liter Pfaudler receiver tank, 316L stainless steel glass lined body, 316L stainless steel removal dish top, rated 50 psi and full vacuum at 450 f internal, on stand, 4015 glass steel lining, Feldmeier top part# SO33612B, serial# J093372, national board# 52545, built 2012.

8. Used 50 Liter Diosna High Shear Mixer: Model P50 10/1/2025

   Used 50 Liter Diosna high shear mixer, Model P50, stainless steel construction, jacketed bowl, 3 kw mixing blade motor drive, side plug valve discharge, Allen Bradley PLC controls with Panelview HMI touchscreen, 460 volt, serial# 240 049.

9. Used Glatt GPCG2 LabSystem Fluid Bed Dryer 10/1/2025

   Used Glatt GPCG2 LabSystem Fluid Bed Dryer, 200-460V, 50/60Hz, 3 PH, serial# 79589, built 2013.

10. Used Freund-Vector Micro Roll Compactor & Granulator: TFC-LAB 10/1/2025

    Used Vector Freund roller compactor system, model TFC-LABO, stainless steel construction, approximately 50 mm roll diameter x 24 mm roll face width rolls, vertical compression screw with motor, with motor controllers for rolls and feed screw, rated 5 g-1 kg/hour production speed, with Vector oscillating granulator, serial# RC-266 46483, built 2008.