Penntech Machinery Products
-
Aseptic Pharmaceutical Filling Equipment
10/27/2016
PennTech's model FS-22 is a machine designed specifically for low- to medium-speed pharmaceutical, biotech and animal health filling and rubber stopper inserting applications.
-
External Vial Washer With In-Line Decontamination
6/4/2015
The EVW-Series is the industries’ only in-line decontamination system to completely encapsulate vial caps with a watertight seal. This allows for increased washing pressures for thorough cleaning; the entire vial body including the bottom is exposed to the water jets.
-
Freeze Drying Loading and Unloading Equipment
12/30/2014
PennTechs customized Automatic Loading/Unloading Systems can be installed as part of a new freeze dryer installation and as retrofit with almost all existing freeze dryers.
-
High Speed Pharma Vial Washer: RW1150
6/4/2015
The RW-1150 is a high speed automatic vial washer for pharmaceutical and biotech applications with an output of up to 400 vials/min (2ml). Vial range 2-500ml. (change parts requires). Standard features include: Recycling of WFI, intermittent spraying and automatic lid lift mechanism.
-
Pharmaceutical Aseptic Capping Equipment
12/31/2014
PennTech offers a state-of-the-art aseptic capping machine, model AC-6. The machine is designed specifically for low to medium speed pharmaceutical, biotech and animal health capping applications.
-
Pharmaceutical Aseptic Vial Filling – FSC-1R
3/24/2015
The FSC-1R is an intermittent-motion filling, stopper inserting, capping machine designed for aseptic applications in a class-100 environment. The machine is designed for vials from 2 ml to 100 ml with an output of 20-30 vials per minute.
-
Pharmaceutical Sterilization and Depyrogenation Tunnels
2/11/2015
A uniquely simple, yet effective, method of loading pharmaceutical vials into the depyrogenation tunnel.
-
Pharmaceutical Sterilization Tunnel Loader
12/30/2014
The TP-1 is compact tunnel loader suitable for sterilizing tunnels with a belt width of up to 600mm. The TP-1 accommodates the full range of pharmaceutical vials, from 2-100ml, without change parts. Even small unstable 2ml vials are gently loaded onto the tunnel belt without tipping over. The TP-1 allows full access to the tunnel infeed area.
-
Pharmaceutical Trayloader, TL-100
12/31/2014
The TL-100 is controlled by a Programmable Logic Controller (PLC) and will handle plastic and glass vials with speeds of up to 200 vials per minute (depending on vial diameter and tray size). It is designed to handle trays up to 610 mm (24") wide (open end) and up to 610 mm (24") deep. Tray materials can be metal, cardboard, corrugated plastic, or rigid plastic.
-
Pharmaceutical Trayloader, TL-200
12/31/2014
The TL-200 has two loading platforms (the TL-100 has one), so that two trays are loaded simultaneously. Once the trays are full, the operator replaces one of the loaded trays with an empty one and the machine immediately resumes loading that tray. The operator then replaces the other loaded tray with an empty one. When in place, the machine will resume loading both trays. The process is seamless; there is no additional work to be done or buttons to be depressed by the operator. Once a tray is full, the loading process stops and a yellow light and audible signal indicate that the tray can be replaced.