Product/Service

Large Volume Pharmaceutical Parenteral Packaging Systems

IV-bottles.jpg

Large Volume Parenterals are typically injectable products designed for intravenous delivery applications. The large volume parenteral bottles are most often produced from a resin that can be autoclaved, either at 106° C or 121° C.

Large Volume Parenterals are typically injectable products designed for intravenous delivery applications. The large volume parenteral bottles are most often produced from a resin that can be autoclaved, either at 106° C or 121° C.

IV bottles and irrigation bottles can be made in the ASEP-TECH® Blow/Fill/Seal machine from the same mold by interchanging the seal mold to provide different top geometries. Separate injection molded caps can be welded to the blow/fill/seal container to create a multi-entry format, usually used to introduce a secondary medication into the solution prior to dispensing to the patient.

Special diameter ports can be provided on the bottles to accommodate plastic needle-less spikes, designed for infusion administration. Bottles can be designed with integral hangers.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information