PTS Powder Transfer System®: Dense Phase Powder Conveying
PTS Powder Transfer System® challenges convention by using both vacuum and pressure to move powders as if they were liquids. This eliminates the need for gravity charging and therefore making multi floor processes a requirement of the past.
PTS is a significant enhancement to any process, providing total containment where necessary, but always speeding up production whilst improving safety and hygiene.
Batch times are substantially reduced and existing process steps are linked to each other.
More than 5000 PTS systems are in use worldwide for various applications from charging reactors, to emptying centrifuges or packing powders under high containment.
PTS stands for a unique technology. It allows the transfer of a large range of powders with different characteristics.
These include very fine (< 1 micron), cohesive and wet ones (above 50% wetness) as well as powder with a very low MIE (< 1 mJ).
Its flat filtration system enables dense phase conveying with a low velocity below 1-3 m/s and powder concentrations above 50-150 kg powder/kg air. Its operation principle further guarantees no segregation nor particle damages during the transfer as well as very low electrostatic charging. The hygienic PTS design allows full CIP/SIP operation.