Product Inspection White Papers & Case Studies

  1. Case Study: Pharmaceutical CMO Uses X-Ray, Metal Detection And Checkweigher Systems To Achieve High Quality Standards 8/11/2011
    Pharma Tech Industries (PTI), a contract manufacturer and packer of pharmaceuticals, medical devices and personal care products, is focused on exceeding customers’ expectations. To consistently achieve their high quality standards, they rely on x-ray and metal detection systems from Mettler-Toledo Safeline and checkweighers from Mettler-Toledo Hi-Speed.
  2. How To Select Critical Control Points For X-Ray Systems 5/13/2011
    Manufacturers typically install an x-ray inspection system at the end of the production line, although it can be installed at any point during the production process. By Mettler-Toledo Safeline
  3. How To Select Critical Control Points For X-Ray Systems 5/13/2011

    Manufacturers typically install an X-ray inspection system at the end of the production line, although it can be installed at any point. This white paper addresses questions about CCPs for x-ray inspection.

  4. White Paper: X-Ray Weighing Technology: Exploding The Checkweigher Accuracy Myth 1/6/2011
    At the time of this writing, it has been apparent for several years that there is a fundamental misunderstanding about the viability of an X-ray Inspection system to be used as a checkweighing device. By Novus X-Ray LLC
  5. X-Ray Weighing Technology: Exploding The Checkweigher Accuracy Myth 1/6/2011
    At the time of this writing, it has been apparent for several years that there is a fundamental misunderstanding about the viability of an X-ray Inspection system to be used as a checkweighing device. By Novus X-Ray LLC
  6. Pre-Audit Services Protect Top Drug Manufacturer 12/31/2009
    In an environment of increasing safety regulations and compliance audits, a large midwest pharmaceutical product manufacturer turned to Mettler-Toledo Safeline for a systematized annual pre-audit program for their 70-plus metal detectors and x-ray inspection systems.
  7. Comparing The LFS Machine To The Methylene Blue Dye Test For Leak Testing Blister Packs 6/16/2008

    Application Note: Comparing The LFS Machine To The Methylene Blue Dye Test For Leak Testing Blister Packs

  8. The Solution For Leak Testing Of FFS/Strips/Plastic Ampoules 6/12/2007
    Form – Fill - Seal machines use heat sealable flexible plastic package which is then filled and heat sealed and cut off. FFS are widely used as medicinal packaging.
  9. Bonfiglioli Establishing Relationships In All Industry Sectors With Leak Testing Solutions Pharmaceutical Online Interview With Giuseppe Bonfiglioli, President, Bonfiglioli Engineering 4/3/2007
    The editorial staff at Pharmaceutical Online recently sat down with Giuseppe Bonfiglioli, President, Bonfiglioli Engineering, to discuss how the company provides leak testing equipment to all sectors of the pharmaceutical manufacturing industry. Enjoy the discussion. Submitted by Bonfiglioli Engineering SRL

  10. Application Note: SXE-41 - Principal Of Operation 4/14/2004
    Bonfiglioli Engineering has been established since 1974 and is located in Ferrara, Italy. Years of experience and continuous research have led to the development of leak testing machines for all types of packaging products including Plastic Containers, Pharmaceutical Packaging, Aerosol Cans, Food & Beverage Cans, Pouches, Chemical & Cosmetic Containers, Filled & Sealed Containers...