Pharmaceutical Production Solutions

  1. High Shear Batch Mixers For Dispersions And Emulsions 2/7/2023

    High Shear Mixers equipped with the Solids/Liquid Injection Manifold (SLIM) Technology deliver powders in an efficient manner for quick wet-out and complete dispersion into low-viscosity liquids.

  2. A Semi-Automated Tangential Flow Filtration System 7/8/2024

    ÄKTA flux is a semi-automated tangential flow filtration/cross flow filtration system for concentration and diafiltration as well as cell harvest and clarification.

  3. Film Coating Technologies For The Pharmaceutical Manufacturing Industry 5/12/2023

    Film Coating Technologies is a two-and-a-half-day training event focused on batch, continuous and Wurster technologies used to coat tablets, hard shell, and softgel capsules.

    We will walk through the entire process of preparing the solutions, cleaning and setting up the equipment, calibration and run several batches of different tablets and capsules.

    We will provide an explanation of each step in the process, common terminology, and provide practical knowledge of each topic. Hands on breakout sessions will be part of this course!

  4. Used GEA Niro Pharmaceutical Spray Drying System 11/4/2021

    Used GEA Niro sanitary spray drying system consisting of: Model PSD4 GEA Niro spray dryer, approximately 8' inner diameter x 8'6" straight side x 8'9" deep cone bottom spray dryer chamber, 316 stainless steel product contact surfaces, mirror internal finish, with fluid nozzle and centrifugal rotary atomizers, approximately 17" diameter, sanitary stainless steel cyclone fines collector, approximately 6' diameter dust collector, sanitary stainless steel construction, pulse jet, cone bottom, set up for electric or steam heating with Watlow, 145 kw electric heater with external Hepa filter, air handler with steam coil and Watlow 37.25 kw electric heater, internal Hepa filter, designed for nitrogen purge, 7.5 hp process air supply blower, 7.5 hp process air return blower, set up for solvent recovery with condenser(less receiver pot), solution feed pump with Micro Motion flow meter, inter connecting pipe work from dryer, to dust collector and cyclone, GEA Niro control panel and HMI panel, 460 volt, 3 phase, GEA Niro fabrication# 099-0013-00, built 1999.

  5. CHO Cell Line Development Services For Therapeutic Protein Development 7/11/2025

    Discover a CHO Cell Line Development Service that delivers high-yield, stable cell lines for therapeutic protein production, backed by decades of innovation.

  6. Used 1500 Liter DCI Reactor 10/1/2025

    Used 1500 liter DCI reactor, 316 stainless steel construction, approximately 50” diameter x 45” straight side, dish top and bottom, rated 45 psi and full vacuum at 250 f internal, jacketed for 145 psi and full vacuum at 364 f, top entering off center 1 hp agitator with mechanical seal, 18” top manway, on legs, serial# JS3464, national board# 6432, built 2006.

  7. Patient-Centric Drug Delivery Device 11/7/2025

    ArQ is built around our primary cyclic olefin copolymer (COC) drug container. It offers an autoinjector that is simple to use, with the flexibility and ability to deliver a wide range of viscosities and volumes.

  8. The Power Of One: mRNA Services

    We offer mRNA drug substance, formulated bulk drug product manufacturing (encapsulation), and fill/finish from a single site.

  9. Used Quadro Comil: Model U5 10/3/2024

    Used Quadro Comil , model U5, stainless steel construction, on adjustable stand, serial# U5-0290, built 2010. Requires blade and screen.

  10. Used Glatt Powrex 600 Liter High Shear Pharmaceutical Mixer 10/6/2020

    Used Glatt Powrex high shear granulating mixer, model FM-VG600, 600 liter capacity, stainless steel product contact surfaces, jacketed bowl, 75 kw main blade, 22/11 kw chopper, with pneumatically operated side discharge plug valve, on stand, serial# 93.3313, built 1995.