Quality Control

  1. Non-destructive Moisture Analysis Of Freeze Dried Product 1/2/2019

    This webinar describes how non-destructive headspace moisture analysis can be used for characterizing batch moisture distributions, for lyo cycle development and optimization, and for freeze dryer moisture mapping and validation.

  2. Determining CCI During Deep Cold Storage 7/23/2020

    Deep cold storage, at dry ice (-80°C) or even cryogenic (-196 °C) temperatures, poses a significant challenge to packaging components and can result in CCI failures.

  3. Mitigating Ultracold Storage And Transport Risk With CCIT

    Dr. Derek Duncan, Director of Product Lines, Lighthouse Instruments, and Brandon Zurawlow, Chief Scientific Officer, CS Analytical, discuss a program for generating packaging data for deep cold storage products.

  4. Data Integrity In The Quality Control Lab: No Pen, No Pain 12/10/2024

    Data integrity in pharmaceutical QC labs is critical for product safety. This webinar explores digital solutions to improve traceability, reduce paperwork, and enhance workflows.

  5. Using Positive Controls In Container Closure Integrity Studies 1/2/2019

    This webinar describes the use of positive controls as an important element of CCI studies designed to validate packaging components for CCI or to qualify processes for producing good CCI.

  6. Container Closure Integrity Testing Method Development

    Dr. Derek Duncan, Director of Product Lines, Lighthouse Instruments, covers approaches that can be used for method development for CCI testing in all phases of the product life cycle.

  7. The Route To Faster Microbial Quality Control 6/7/2023

    Join product and application experts Anne-Grit Klees, Carine Krebs, and Esther Welterlin to discover the benefits of using a new rapid microbial detection platform.

  8. Determining And Controlling Oxygen Levels In Sensitive Formulations 1/2/2019

    This webinar will review how oxygen levels in finished parenteral drug containers can be determined and controlled throughout the product life cycle by using laser-based headspace analysis.

  9. Expanding Capabilities In QC Analyses With Advanced LC Detection 11/26/2024

    Today's quality control (QC) labs need instruments that can accurately take on a wide range of tasks. Discover a system that allows QC labs to enhance their capabilities and achieve various goals.

  10. Oxygen Permeation In Pre-Filled Syringes 1/2/2019

    This webinar presents how to design and conduct studies to assess the total oxygen permeation rate of your pre-filled syringes, and how to determine if the permeation is primarily through the plunger or through the tip.  Protecting oxygen-sensitive formulations during filling will also be discussed.