Containment & Isolation White Papers & Case Studies
-
A Guide to Decreasing Contaminants In Sterile Manufacturing
6/20/2018
Containment is key during aseptic processing and this has led to the development of new transfer methods that are both enclosed and minimize the requirement for operator intervention.
-
ISPE SMEPAC Guidelines Driving High Potency Facilities And Equipment
5/10/2018
Working towards a goal to define current good practices providing information to allow organizations to benchmark their practices and improve on them.
-
Containment Solutions For Oral Solid Dose Manufacturers
1/30/2018
By reviewing and evaluating the health and safety data for each product involved in the manufacturing process this supplier was able to determine that the correct containment solution.
-
Cost-Effective Solution For Sterile Antibiotic Powder Filling Of Al- Kegs
10/20/2017
This supplier worked with customer to develop the most efficient and reliable solution that ensured a reliable and safe pharmaceutical process for the operators while the kegs were filled.
-
Self-Contained Ventilated Work Enclosures Minimize Contamination
9/21/2017
A chemical industry company working to provide emission control technology for the natural environment sources a containment solution for its automotive business.
-
Reducing Laboratory Fume Hood Energy Consumption
9/5/2013
There is an ever-increasing demand for laboratories to have a reduced impact on the environment, as well as a lower cost to operate. With this continuing push for reduced energy consumption in laboratories, lab planners, architects, engineers, and lab managers are leaving no stone unturned. By Luke Savage, LEED Green Associate
-
Factors To Consider When Purchasing A Fume Hood
9/5/2013
The process of finding the right fume hood can be a little complicated if you don't know the right questions to ask. You can save yourself a lot of trouble if you know the answers to these questions when you start shopping.
-
Concentrating Heat Sensitive Samples Without Degradation
9/5/2013
Typically, sample concentration or solvent evaporation requires heat to drive the evaporation process. For heat sensitive samples, adding too much heat can damage or modify the structure of the analyte. By Jenny Sprung, Product Manager
-
Containment Capabilities Of A Class II, Type A2 BSC Using A Chemo Pad On The Worksurface
7/21/2013
The Test Objective is to study the containment capabilities of the BSC when using a chemo plus prep mat on the worksurface.
-
Drastically Reduced Isolator Decontamination Cycles
2/28/2013
With the use of catalytic aeration, M + P is able to reduce the duration of the aeration phase in isolators by about 50 %. The aeration phase is the most time consuming cycle during H2O2 decontamination. By Felix Henning, Optima Packaging Group GmbH