Liquid Dose Manufacturing Solutions

  1. Glass Vial Forming Lines 8/27/2021

    Stevanato Group vial forming lines come in a variety of specifications that vary depending on the production requirements. By maintaining close ties with the customer throughout every step of the process, we can design and manufacture fully tailored, purpose-built equipment capable of producing vials with entirely custom dimensions and shape.

  2. Injectable Drug Manufacturing 9/11/2024

    From the production floor to the shipping door, your unique clinical or commercial requirements will be fulfilled at each step of the process.

  3. Used IWKA Pharmaceutical Cartoner 8/5/2022

    Used IWKA fully automatic continuous motion horizontal cartoner, model CPS-R Cartopack, capable of speeds up to 300 cpm, adjustable three chain machine on 6" centers for a carton size range: (length) 25 - 125MM longx 16 - 80MM wide x 55 - 180MM deep, Nordson 3100 Hot melt glue system, 3' long carton magazine with Siko guage adjustment, three head rotary carton feeder, 8' long adjustable bucket infeed system, presently set up to accomodate Guk sheet fed leaflet feeder for "U" type leaflet insertion, equipped with dual blister feed system and was last running blisters in an OTC pharmaceutical operation, 460 volt, serial# 279, built 1998.

  4. Pharmaceutical Headspace Oxygen Stability Studies 5/19/2016

    Many of today's biopharmaceutical formulations may potentially suffer from oxidation to some degree. Large molecule formulations are relatively more delicate and may be prone to degrade in the presence of oxygen.  Besides a loss of efficacy and reduction in shelf life, exposure of such products to oxygen can result in product discoloration, changes in dissolution rate and profile, and even toxicity or other pharmacological properties associated with negative side effects. During the development of an oxygen-sensitive product, studies are performed that investigate the formulation’s interaction with oxygen. End-of-shelf-life stability studies verify that the product indeed retains efficacy under specified headspace oxygen levels. Such studies allow for the specification of appropriate initial headspace oxygen levels in the primary packaging.

  5. Liquid And Powder Fill-Finish Platform 3/28/2025

    Part of our Evolve range, this RTU-based, automated fill-finish platform can fill liquids and powders on the same line. Ideal for dual chamber formats and reconstitution devices.

  6. Aseptic And Syringe Filling Equipment For Contract Manufacturers (CDMOs) 11/12/2020

    Having the right balance of capacity and capabilities in all market conditions is the struggle that Contract Manufacturer Organizations face daily. Add to it the cost and complexity of maintaining a suitable parenteral manufacturing facility, the risks can be high. With constantly evolving parenteral market needs, having flexibility while achieving high utilization is key to long term success. To support these challenges, AST’s line of aseptic and syringe filling and closing machines provide adaptive fill-finish capabilities to ensure that any contract manufacturing organization has the right capabilities for any vial, syringe filling or cartridge application.

  7. Used Feldmeier 200 Liter Stainless Steel Pharmaceutical Tank 4/26/2024

    Used 200 liter Feldmeier reactor, 316L stainless steel construction, approximately 26" diameter x 25" straight side, removable dish top, dish bottom, rated 60 psi and full vacuum at 302 f internal, jacketed for 125 psi and full vacuum at 353 f, .75 hp bottom mounted agitator drive, 230/460 volt, serial# SO29512, national board# 4463, built 2012.

  8. A Gloveless Aseptic Filling System For Vials, Syringes, And Cartridges 3/23/2023

    A gloveless system that reduces risk for flexible vial, syringe, and cartridge filling.

  9. High Potent APIs

    Discover how Cambrex can reliably develop and manufacture a broad spectrum of HPAPIs and compounds.

  10. Safe Handling Of Toxic Or Corrosive Pharmaceutical Liquids 2/8/2021

    DCS® Liquid was specifically developed for toxic and corrosive liquids, achieving containment levels of < 1 ppb. The safe and contained emptying and filling of drums is thus made possible without additional precautions, such as full protective clothing or large laminar airflow booths.