Solid Dose Manufacturing Solutions

  1. Used O'Hara Pharmaceutical Tablet Coating Pan: FC400 7/2/2025

    Used 60" O'Hara FastCoat coating pan, model FC400 (60xc5), stainless steel construction with 60" diameter perforated Pan, solvent rated design, O'Hara advanced controls with Allen Bradley Compact Logix PLC, PC and HMI units, O'Hara manifold with Schlick nozzle spray arm, built in Watson Marlow peristaltic pump with Micromotion mass flow and recirculation system, reverse pan unloading, outdoor rated air handling unit (AHU) with preheat steam coil, chilled water dehumidification unit, steam reheat with face/bypass temp control dampers, HEPA module, Camfil DCU with FIKE suppression and isolation system, bag in bag out with exhaust HEPF module, 480 volt, system serial# 4501, built 2020.

  2. Tamping Pin Dosator 3/28/2025

    Part of 3P innovation’s Pharma Equipment Discover range, the tamping pin dosator fills capsules during early phase pharmaceutical formulation and automatically produces early phase clinical batches.

  3. Liquid And Powder Fill-Finish Platform 3/28/2025

    Part of our Evolve range, this RTU-based, automated fill-finish platform can fill liquids and powders on the same line. Ideal for dual chamber formats and reconstitution devices.

  4. Vented Balance Safety Enclosure 4/3/2019

    For use in pharmaceutical, chemical, biological, and toxicological laboratory settings. Specifically designed to provide maximum containment for balance applications. The opening of the enclosure has uniquely designed acrylic airfoils that allow a smooth turbulence-free airflow that prevents balance fluctuation. Weigh down to 5 places without fluctuations or loss of product. The work surface is black for easy powder detection, constructed of tough, chemically resistant phenolic resin, and has a dished bottom for containing spills. Enclosures feature an ergonomic, energy efficient design with angled front for worker comfort.

  5. Used Pharmaceutical Tablet Presses 12/1/2022

    Find all the equipment used to make solid dose tablets and other compressed materials right here. Federal Equipment Company offers used tablet presses and equipment to fully complete the tablet manufacturing process – used rotary and single station tablet presses, used tablet dedusters, used friability testers, used hardness testers, used metal detectors, used tablet printers, and an assortment of used tablet press turrets and parts.

  6. Used IMA Pressima Pharmaceutical Tablet Press 6/3/2021

    Used IMA Zanasi 6 F Capsule Filler, rated up to 6000 capsules/hour, no change parts, capable of producing 00-5 size capsules, with controls and Siemens PLC, 230 volt, 3 phase, serial# 35071, built 2006.

  7. Used Sejong 15 Station Phamaceutical Tablet Press 2/23/2023

    Used Sejong rotary tablet press, model GRC-15C, 15 station, D tooled, 6 kn main compression, 2 kn pre compression, 25 mm max tablet diameter, 22 mm max depth of fill, with feed hoppers, rated up to 67500 tablets/hour, with integrated controls and touchscreen interface, serial# ST17866, built 2017.

  8. Used Fitzpatrick Fitzmill: D6A 11/14/2024

    Used Fitzpatrick Fitzmill, model D6A, stainless steel construction, pan feed, driven by 5 HP, 230/460 volt motor, on stand, serial# 10770.

  9. Pharmaceutical Encapsulation Training Courses For The Pharmaceutical and Supplement Industries 5/12/2023

    Immerse yourself in this comprehensive two-and-a-half-day training event that focuses on two-piece hard shell capsule filling for pharmaceutical and supplement manufacturing. Learn about the encapsulation process, common equipment, terminology, and gain practical knowledge with hands-on breakout sessions.

  10. USP<1062> Tablet Compression Characterization 7/29/2024

    Natoli Scientific takes pride in its comprehensive USP<1062> Tablet Compression Characterization services, tailored to address the complexities of tableting in pharmaceutical manufacturing. Staying true to the parameters outlined in the United States Pharmacopeia (USP) Chapter 1062, our approach meticulously evaluates tablet compression behaviors. By thoroughly characterizing the compression profile, we can pinpoint the optimal compression force required to form a cohesive tablet without applying undue stress that could lead to capping — the separation of tablet tops during or after the compression phase.