Solid Dose Manufacturing Solutions

  1. Containment: Offloading 5/2/2011

    Containment solutions for the contained offloading of Aurora Filters.

  2. Quick-Release Pharmaceutical Tablet Tooling 6/5/2018

    Natoli Quick-Release Tablet Tooling allows researchers to test different dwell times during the tablet R&D process without the expense of buying several different sets of tools or the time needed to change complete sets of tooling or turret speed.

  3. Filling Of Powders Into Drums And Bags 8/13/2020

    Dec excels in providing comprehensive technical solutions for packing powders into bags and drums from process equipment discharge such as a dryer or a mixer, milling and dispensing to the final packing of the product.

  4. Used Korsch 25 Station Tablet Press 8/8/2019

    Used Korsch rotary tablet press, model PH250/25, 25 station, 20 Kn pre compression, 80 Kn main compression, 16 mm max tablet diameter, 18 mm max depth of fill, single side with force feeder, rated up to 180000 tablets/hour, serial# 1.0031.94, built 1994.

  5. Used O'Hara Pharmaceutical Tablet Coating Pan: FC400 7/2/2025

    Used 60" O'Hara FastCoat coating pan, model FC400 (60xc5), stainless steel construction with 60" diameter perforated Pan, solvent rated design, O'Hara advanced controls with Allen Bradley Compact Logix PLC, PC and HMI units, O'Hara manifold with Schlick nozzle spray arm, built in Watson Marlow peristaltic pump with Micromotion mass flow and recirculation system, reverse pan unloading, outdoor rated air handling unit (AHU) with preheat steam coil, chilled water dehumidification unit, steam reheat with face/bypass temp control dampers, HEPA module, Camfil DCU with FIKE suppression and isolation system, bag in bag out with exhaust HEPF module, 480 volt, system serial# 4501, built 2020.

  6. Disposable Containment System For ADC Manufacturing 6/15/2026

    Learn how single-use isolator technology, purpose-built for ADC manufacturing, eliminates cleaning protocols and delivers containment performance below 10ng/M³.

  7. Powder Flow Properties & Characterization Services 1/31/2024

    Basic Powder Flow Characterization [USP <1174>]:

    A powder flow analysis is an indicator of how well formulation will release from the hopper during the tableting. It is important to know that the developed formulation is showing ‘Mass Flow’ or ‘Funnel Flow’ or ‘Rat Holing’.

    Powder blend shows ‘Mass Flow’ when the entire solid bed is in motion during the discharge of material from the outlet. This is a ‘First-in-First-Out’ process. Hoppers offering ‘Mass Flow’ have steep and/or low-friction walls. This flow offers ‘No-Arching’, ‘Less Segregation’, and ‘Stable Powder Flow’.

    When the hopper is not sufficiently steep and smooth enough to ensure sliding along its wall, the powder blend exhibit ‘Funnel Flow’. Such hoppers are sensitive to arching and ratholing. In this case, powder discharge from the hopper is not predictable.

  8. Pharmaceutical Solid Dose Manufacturing Process Training Courses 5/16/2023

    Introducing Solid Dose Manufacturing Process Training, a comprehensive three-day course designed to equip you with the essentials of creating high-quality tablet and capsule oral solid dosage forms. Limited to 24 participants, this hands-on course ensures a more intimate learning experience tailored to each attendee's needs. Discover the techniques that will assist you in enhancing your development and scale-up operations in the pharmaceutical industry.

  9. Multicomponent Dosing System 8/12/2015

    The mixer is loaded with the individual raw materials exactly according to the formulation. The combination of Dosicon®  weighing equipment with suction conveying units fulfils this task. Fundamental advanrages of JetSolutions automatic multi-component dosing are high dosing accuracy (for quantities ranging from a few hundred grams to several hundred kilos), the prevention of cross-contamination risks, and freedom from dust.

  10. Powder Discharging Systems For Non-Potent To High Potent Active Ingredients 8/7/2020

    The big bag emptying stations of Dec are based on a modular design. This allows to be ideally equipped with systems for each product’s characteristics with corresponding docking systems for non-potent to highly active powders. Depending on the product flow, there is a range of discharge devices or lump breakers available. With the use of load cells, it is possible to dose accurately into the receptacle.